Evaluation of nonuniform residual stress using blind-hole drilling technique

被引：1

作者：

Rajendran, R. ^{[1
]}

Baksi, P. ^{[1
]}

Bhattacharya, S. ^{[1
]}

Basu, S. ^{[1
]}

机构：

[1] BARC Facil, Kalpakkam, Tamil Nadu, India

来源：

EXPERIMENTAL TECHNIQUES | 2008年 / 32卷 / 03期

关键词：

Calibration - Materials testing - Residual stresses - Strain;

D O I：

10.1111/j.1747-1567.2007.00224.x

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The blind-hole drilling, a semi-destructive method, is used for evaluation of nonuniform residual stress in a structure. The hole drilling method can assess the residual stress that is either uniform or varying with depth. The relieved strains are measured at the end of the drilling operation for the stress that is uniform, while for the stress that is nonuniform with depth, an incremental technique is used. The relieved strains are measured during a series of small hole-depth increments. The constants relating the principal stresses to the measured strains are introduced using a calibration experiment. The rosette along with the structural material and the hole drilling system was calibrated as per ASTM E 837, ensuring that the hole geometry, the hole diameter, and depth are acceptable for the stress measurement.

引用

页码：58 / 61

页数：4

共 50 条

[31] Evaluating Uncertainty in Residual Stress Measured Using the Deep-Hole Drilling Technique
Goudar, D. M.
Truman, C. E.
Smith, D. J.
STRAIN, 2011, 47 (01) : 62 - 74
[32] Residual stress measurements in steel pipes using DSPI and the hole-drilling technique
Lothhammer, Livia R.
Viotti, Matias R.
Albertazzi, Armando, Jr.
Veiga, Celso L. N.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2017, 152 : 46 - 55
[33] Residual stress measurements in rotting mitt rolls using deep hole drilling technique
Kingston, E
Smith, DJ
IRONMAKING & STEELMAKING, 2005, 32 (05) : 379 - 380
[34] EFFECT OF GAUGE VOLUME ON THE RESIDUAL STRESS MEASUREMENT USING DEEP HOLE DRILLING TECHNIQUE
Mahmoudi, Amir H.
Smith, David J.
Truman, Chris E.
Pavier, Martyn J.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B, 2010, : 1363 - 1368
[35] 2 HOLOGRAPHIC BLIND-HOLE METHODS FOR MEASURING RESIDUAL-STRESSES
LIN, ST
HSIEH, CT
HU, CP
EXPERIMENTAL MECHANICS, 1994, 34 (02) : 141 - 147
[36] Residual stress analysis in crankshaft using the hole drilling
Montay, G.
Cherouat, A.
Lu, J.
RESIDUAL STRESSES VII, 2006, 524-525 : 537 - 542
[37] Use of Plastic Correction Formula to Improve Accuracy of Welding Residual Stress Test with Blind-Hole Method
Qiu Zhao
Kongsheng Chen
Meizhong Chen
Bruno Briseghella
Zhiyong Guo
Guotao Yang
Transactions of Tianjin University, 2018, (05) : 480 - 488
[38] Use of Plastic Correction Formula to Improve Accuracy of Welding Residual Stress Test with Blind-Hole Method
Zhao Q.
Chen K.
Chen M.
Briseghella B.
Guo Z.
Yang G.
Transactions of Tianjin University, 2018, 24 (5) : 480 - 488
[39] Research on Measurement of Residual Stresses of Lithium Hydride by a Blind-Hole Method
Lin Bo
Yang Weicai
Chi Yonggang
Liu Mei
Shen Jun
Shan Dongwei
RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 528 - 531
[40] Use of Plastic Correction Formula to Improve Accuracy of Welding Residual Stress Test with Blind-Hole Method
Qiu Zhao
Kongsheng Chen
Meizhong Chen
Bruno Briseghella
Zhiyong Guo
Guotao Yang
Transactions of Tianjin University, 2018, 24 (05) : 480 - 488

← 1 2 3 4 5 →