Microcellular Foam Injection Molding with Cellulose Nanofibers (CNFs)

Cellulose nanofibers (CNFs) nanocomposites polypropylene foams are prepared by microcellular foam injection molding with core-back operation. The modified CNFs were blended with isotactic-polypropylene (i-PP) at different CNFs weight percentages and foamed to investigate the effect of CNFs on cell morphology. CNFs in i-PP increased the elastic modulus and induced a strain hardening behavior. CNFs also shifted the crystallization temperature of i-PP to higher temperature and enhanced crystallization. With these changes in rheological and thermal properties, CNFs could reduce the cell size and increase the cell density of the foams. By adjusting the core-back timing i.e., foaming temperature, the closed cell and the nano-fibrillated open cellular structure could be produced. The flexural modulus and bending strength of foams were measured by three point flexural tester. The flexural modulus and bending strength were increased as the CNFs content in i-PP was increased at any foam expansion ratio.