Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting

被引：141
|
作者：
Holzweissig, Martin Joachim [1 ]
Taube, Alexander [1 ,2 ]
Brenne, Florian [1 ,2 ]
Schaper, Mirko [1 ]
Niendorf, Thomas [3 ]
机构：
[1] Univ Paderborn, Lehrstuhl Werkstoffkunde Mat Sci, D-33095 Paderborn, Germany
[2] DMRC, D-33098 Paderborn, Germany
[3] Tech Univ Bergakad Freiberg, Inst Mat Engn, D-09599 Freiberg, Germany
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2015年 / 46卷 / 02期
关键词：
MARTENSITE; SLM;
D O I：
10.1007/s11663-014-0267-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructural characterization of hot work tool steel processed by selective laser melting was carried out. The findings shed light on the interrelationship between processing parameters and the microstructural evolution. It was found that the microstructure after layer-wise processing partially consists of metastable-retained austenite which transforms to martensite in a subsequent tensile test. This improves the mechanical properties of the hot work tool steel enabling direct application. (C) The Minerals, Metals & Materials Society and ASM International 2015
引用
收藏
页码：545 / 549
页数：5
相关论文
共 50 条
  • [21] Manufacturing and characterization of similar to foam steel components processed through selective laser melting
    Caiazzo, Fabrizia
    Campanelli, Sabina Luisa
    Cardaropoli, Francesco
    Contuzzi, Nicola
    Sergi, Vincenzo
    Ludovico, Antonio Domenico
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8): : 2121 - 2130
  • [22] Manufacturing and characterization of similar to foam steel components processed through selective laser melting
    Fabrizia Caiazzo
    Sabina Luisa Campanelli
    Francesco Cardaropoli
    Nicola Contuzzi
    Vincenzo Sergi
    Antonio Domenico Ludovico
    The International Journal of Advanced Manufacturing Technology, 2017, 92 : 2121 - 2130
  • [23] Microstructural differences and mechanical performance of stainless steel 316L conventionally processed versus a selective laser melted
    Barrionuevo, German Omar
    La Fe-Perdomo, Ivan
    Ramos-Grez, Jorge A.
    Walczak, Magdalena
    Mendez, Patricio F.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2663 - 2673
  • [24] Effect of Thermal Fatigue on Microstructure and Mechanical Properties of H13 Tool Steel Processed by Selective Laser Surface Melting
    Meng, Chao
    Wu, Chun
    Wang, Xuelei
    Li, Jingyue
    Cao, Rui
    METALS, 2019, 9 (07)
  • [25] EFFECT OF CHEMICAL COMPOSITION CHANGE ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF ALUMINUM ALLOYS PROCESSED BY SELECTIVE LASER MELTING
    Nopova, Klara
    Pantelejev, Libor
    Koutny, Daniel
    31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 574 - 579
  • [26] Microstructural characterization of a hot-work tool steel with a martensitic-bainitic microstructure
    Mayer, Svea
    Polzl, Silvia
    Hawranek, Gerhard
    Scheu, Christina
    Leitner, Harald
    Clemens, Helmut
    Siller, Ingo
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2007, 44 (04): : 182 - 192
  • [27] Microstructure and mechanical properties of 304L stainless steel processed by selective laser melting
    Tong X.
    Zhang Y.-J.
    Huang Y.-S.
    Hu Z.-Z.
    Wang Q.
    Zhang Z.-H.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2019, 49 (05): : 1615 - 1621
  • [28] Evaluation of the fatigue characteristics of laser-processed hot work tool steel based on reliability
    Hanaki, S
    Sui, YH
    Yamashita, M
    Uchida, H
    Tsujii, H
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2003, 19 : 83 - 85
  • [29] The investigation of microstructure and mechanical properties of tool steel produced by selective laser melting technology
    Agapovichev, A. V.
    Sotov, A. V.
    Kyarimov, R. R.
    Alexeev, V. P.
    Smelov, V. G.
    Sufiiarov, V. S.
    Masaylo, D. V.
    INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE ON INNOVATIONS IN ENGINEERING AND TECHNOLOGY, 2018, 441
  • [30] Selective Laser Melting of 30CrMnSiA Steel: Laser Energy Density Dependence of Microstructural and Mechanical Properties
    Lin-Zhi Wang
    Wen-Hou Wei
    Acta Metallurgica Sinica (English Letters), 2018, 31 : 807 - 814
12345