Modeling of strain-induced precipitation kinetics and evolution of austenite grains in Nb microalloyed steels

被引:7
|
作者
Zhou Xiao-guang [1 ]
Liu Zhen-yu [1 ]
Yuan Xiang-qian [1 ]
Wu Di [1 ]
Wang Guo-dong [1 ]
Liu Xiang-hua [1 ]
机构
[1] Northeastern Univ, State Key Lab Rolling Technol & Automat, Shenyang 110004, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
strain-induced precipitation; start time; precipitation; static recrystallization; grain size;
D O I
10.1016/S1006-706X(08)60128-4
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Considering the effect of strain and chemical composition on. precipitation behavior, new models for the start and end time of Nb(C,N) precipitation in austenite under the conditions of different temperatures and strains have been investigated for Nb microalloyed steel. The value of n in the precipitation kinetic equation has been determined by using the available experimental data in literature, which indicated that n is a constant and independent of temperature. The values of the start and end time of the predicted precipitation are compared with the experimental values. Calculated results are in good agreement with the experimental results. Also, the evolution of austenite grains before ferrite transformation is simulated by taking the effect of precipitation into consideration. The measured austenite grain size is in good agreement with predicted one prior to ferrite transformation.
引用
收藏
页码:65 / 69
页数:5
相关论文
共 50 条
  • [31] Characterization of strain induced precipitation of Nb in microalloyed austenite using classical and novel techniques
    Iparraguirre, C
    Fernández, AI
    López, B
    Scott, C
    Rose, A
    Kranendonk, W
    Soenen, B
    Paul, G
    MICROALLOYING FOR NEW STEEL PROCESSES AND APPLICATIONS, 2005, 500-501 : 677 - 684
  • [32] Effect of Zr on static recrystallization of deformed austenite and strain-induced precipitation in Ti microalloyed steel
    Luo, Hanyu
    Liu, Xing
    Lu, Chao
    Cao, Jianchun
    Yang, Yinghui
    Xiong, Xuegang
    Wang, Chuangwei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2024, 238 (08) : 1395 - 1406
  • [33] Characterisation of strain-induced precipitation behaviour in microalloyed steels during thermomechanical controlled processing
    Gong, Peng
    Palmiere, Eric J.
    Rainforth, W. Mark
    MATERIALS CHARACTERIZATION, 2017, 124 : 83 - 89
  • [34] MECHANISM AND KINETICS OF STRAIN INDUCED PRECIPITATION OF NB(C, N) IN AUSTENITE
    DUTTA, B
    VALDES, E
    SELLARS, CM
    ACTA METALLURGICA ET MATERIALIA, 1992, 40 (04): : 653 - 662
  • [35] Effect of Mn concentration on the kinetics of strain induced precipitation in Ti microalloyed steels
    Wang, Zhenqiang
    Sun, Xinjun
    Yang, Zhigang
    Yong, Qilong
    Zhang, Chi
    Li, Zhaodong
    Weng, Yuqing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 561 : 212 - 219
  • [36] Mathematical modeling of the recrystallization kinetics of Nb microalloyed steels
    Cho, SH
    Kang, KB
    Jonas, JJ
    ISIJ INTERNATIONAL, 2001, 41 (07) : 766 - 773
  • [37] MODELING OF THE KINETICS OF CARBONITRIDES PRECIPITATION PROCESS IN MICROALLOYED STEELS
    Marynowski, Przemyslaw
    Glowacki, Miroslaw
    Adrian, Henryk
    Wozny, Krzysztof
    Koclega, Damian
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 783 - 788
  • [38] Effects of Nb on strain-induced precipitation of NbC and static recrystallization for high Nb pipeline steels
    Qiao, Gui-ying
    Xiao, Fu-ren
    Zhang, Xiao-bing
    Chen, Shao-hui
    Liao, Bo
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1315 - +
  • [39] Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels
    Haidemenopoulos, G. N.
    Aravas, N.
    Bellas, I.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 615 : 416 - 423
  • [40] Strain-Induced Precipitation in Nb-Bearing Low Carbon Multi-Microalloyed Steel
    Yuan, Shaoqiang
    Liang, Guoli
    Zhang, Xiaojuan
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 560 - 564