Impact on the thrombogenicity of surface oxide properties of 316l stainless steel for biomedical applications

被引:16
|
作者
Shih, CC
Shih, CM
Su, YY
Lin, SJ [1 ]
机构
[1] Natl Yang Ming Univ, Sch Med, Inst Clin Med, Div Cardiol, Taipei 112, Taiwan
[2] Vet Gen Hosp, Div Cardiovasc Surg, Taipei, Taiwan
[3] Natl Yang Ming Univ, Cardiovasc Res Ctr, Taipei 112, Taiwan
[4] Taipei Med Univ, Sch Med, Grad Inst Med Sci, Taipei, Taiwan
[5] Amorphous Oxide Technol Inc, Marietta, GA USA
[6] Vet Gen Hosp, Div Cardiol, Taipei 112, Taiwan
关键词
amorphous oxide; open-circuit potential; surface oxide; thrombosis; time constant;
D O I
10.1002/jbm.a.20013
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Surface oxide film on cardiovascular devices could be one of the most critical factors that determine the degree of thrombosis. Previous studies have shown that metallic wire passivated with amorphous oxide film provides excellent corrosion and scratch resistance. Investigation was undertaken to see whether this oxide film, with its unique electrochemical properties, could reduce the development of thrombosis. Results show that amorphous oxide has higher value of time constant, lower open-circuit poten-tial, and lower degree of thrombosis. These distinguished characteristics prove amorphous oxide to be the best candidate for the cardiovascular devices. Amorphous oxide film could be a potential solution to the thrombogenic problem of cardiovascular devices. (C) 2003 Wiley Periodicals, Inc.
引用
收藏
页码:1320 / 1328
页数:9
相关论文
共 50 条
  • [31] Microstructures and Properties of Laser Surface-Reinforced 316L Stainless Steel
    Li Hongpeng
    Sheng Jinma
    Li Bin
    Chang Jiang
    Zhang Yujiao
    LASER & OPTOELECTRONICS PROGRESS, 2020, 57 (19)
  • [32] Microstructure and Properties of Laser Surface Melted AISI 316L Stainless Steel
    Anishetty, Sharath
    Bera, Tapas
    Karak, Swapan Kumar
    Majumdar, Jyotsna Dutta
    Manna, Indranil
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, : 5196 - 5211
  • [33] Strain rate dependence of impact properties of sintered 316L stainless steel
    Lee, Woei-Shyan
    Lin, Chi-Feng
    Liu, Tsung-Ju
    JOURNAL OF NUCLEAR MATERIALS, 2006, 359 (03) : 247 - 257
  • [34] Effect of ultrasonic surface impact on the microstructural characterization and mechanical properties of 316L austenitic stainless steel
    Zhu, Jiangpei
    Zhuang, Mei-Ling
    Qi, Yuting
    Chen, Bin
    Cao, Xiaojian
    PLOS ONE, 2024, 19 (07):
  • [35] Formation of chromium oxide on 316L austenitic stainless steel
    Ohmi, T
    Nakagawa, Y
    Nakamura, M
    Ohki, A
    Koyama, T
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1996, 14 (04): : 2505 - 2510
  • [36] Effect of Initial Surface Scratches on the Cavitation Erosion Behavior of 316L Stainless Steel Substrates and 316L Stainless Steel Coatings
    Lu, Pengfei
    Xu, Ziqi
    Tian, Ye
    Yang, Rui
    Hu, Kaixin
    Li, Hua
    Yin, Yanhong
    Chen, Xiuyong
    MATERIALS, 2023, 16 (04)
  • [37] Nanohardness, corrosion and protein adsorption properties of CuAlO 2 films deposited on 316L stainless steel for biomedical applications
    Chang, Shih-Hang
    Chen, Jian-Zhang
    Hsiao, Sou-Hui
    Lin, Guan-Wei
    Applied Surface Science, 2014, 289 : 455 - 461
  • [38] Fatigue damage in a 316L type stainless steel induced by surface oxide layers
    Vernault, C
    Mendez, J
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 1999, 24 (4-5): : 351 - 362
  • [39] Structure and properties of TaCx coating on biomedical 316L stainless steel by RF magnetron sputtering
    Ding Ming-hui
    Wang Ben-li
    Li Li
    Zheng Yu-feng
    ADVANCED DESIGN AND MANUFACTURE II, 2010, 419-420 : 537 - 540
  • [40] Surface Modification of AISI 316L Stainless Steel by Oxynitrocarburizing for Solar Collector Applications
    Vargas, Gregorio
    Lopez, Lizsandra
    Chavez, Aldo. F.
    PROCEEDINGS OF THE ISES EUROSUN 2018 CONFERENCE - 12TH INTERNATIONAL CONFERENCE ON SOLAR ENERGY FOR BUILDINGS AND INDUSTRY, 2018, : 1077 - 1085