Influence of honing angle on tribological behaviour of cylinder liner-piston ring pair: Experimental investigation

被引：10
|
作者：
Baby, Ajith Kurian [1 ]
Rajendrakumar, P. K. [1 ]
Lawrence, Deepak K. [1 ]
机构：
[1] Natl Inst Technol Calicut, Dept Mech Engn, Kozhikode 673601, Kerala, India
来源：
TRIBOLOGY INTERNATIONAL | 2022年 / 167卷
关键词：
Grey cast iron cylinder liner; Honing angle; Coefficient of friction; Sliding wear; SURFACE-TOPOGRAPHY; FRICTION; WEAR; OPTIMIZATION; TEXTURE; GROOVES; FINISH;
D O I：
10.1016/j.triboint.2021.107355
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Research conducted on the influence of honing angle on the cylinder liner surface lacks consensus on the numerical value of the honing angle for the desired performance of the liner-ring tribosystem. The paper presents the results of experimental work performed on the cylinder liner samples honed at different angles (20 degrees-100 degrees) to explore the influence of honing angles under boundary lubrication conditions. Experiments conducted at two distinct sliding conditions (0.2 m/s and 0.3 m/s) using a linear reciprocating tribometer indicated 40 degrees as the optimum honing angle based on the evaluation of tribological characteristics such as the coefficient of friction and the wear.
引用
收藏
页数：11
相关论文
共 50 条
  • [31] Effect of Bio-Lubricant and Biodiesel-Contaminated Lubricant on Tribological Behavior of Cylinder Liner-Piston Ring Combination
    Arumugam, S.
    Sriram, G.
    TRIBOLOGY TRANSACTIONS, 2012, 55 (04) : 438 - 445
  • [32] Synergetic effects of surface textures with modified copper nanoparticles lubricant additives on the tribological properties of cylinder liner-piston ring
    Yin, Huabing
    Zhang, Xuecheng
    Guo, Zhiwei
    Xu, Yicong
    Rao, Xiang
    Yuan, Chengqing
    TRIBOLOGY INTERNATIONAL, 2023, 178
  • [33] Numerical and Experimental Analysis of the Honing Texture on the Lubrication Performance of Piston Ring-Cylinder Liner Tribosystem
    Li, Tongyang
    Lu, Xiqun
    Ma, Xuan
    Xu, Hanzhang
    Jiao, Bowen
    Zou, Dequan
    TRIBOLOGY TRANSACTIONS, 2019, 62 (06) : 991 - 1006
  • [34] An experimental investigation on friction and wear test parameters of cylinder liner and piston ring pair using Taguchi technique
    Trivedi, H. K.
    Bhatt, D. V.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (09) : 1721 - 1728
  • [35] A comparative investigation on tribological properties of piston ring/cylinder liner tribo-pair using GNP and GNF dispersed lubricants
    Singh, Gurtej
    Wani, M. F.
    Wani, M. Marouf
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2022, 16 (04) : 277 - 297
  • [36] Study on multifractal of friction moment in running-in process of cylinder liner-piston ring
    Li, Guobin
    Tian, Jianming
    Guan, Delin
    Run Hua Yu Mi Feng/Lubrication Engineering, 2006, (04): : 39 - 41
  • [37] Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations
    Gul, M.
    Zulkifli, N. W. M.
    Masjuki, H. H.
    Kalam, M. A.
    Mujtaba, M. A.
    Harith, M. H.
    Syahir, A. Z.
    Ahmed, Waqar
    Farooq, Abdul Bari
    FUEL, 2020, 278
  • [38] Uncertainty Analysis of Friction and Wear-Rate of Cylinder Liner-Piston Ring Tribo Pair Under Boundary Lubrication Conditions
    Baby, Ajith Kurian
    Rajendrakumar, P. K.
    Lawrence, K. Deepak
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (02):
  • [39] A numerical model to investigate the effect of honing angle on the hydrodynamic lubrication between a combustion engine piston ring and cylinder liner
    Spencer, A.
    Almqvist, A.
    Larsson, R.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J7) : 683 - 689
  • [40] Tribological behavior of the boron succinimide on cylinder liner and piston ring surfaces
    Ozkan, Dogus
    MECCANICA, 2018, 53 (11-12) : 2861 - 2882
12345