Influence of honing angle on tribological behaviour of cylinder liner-piston ring pair: Experimental investigation

被引：10
|
作者：
Baby, Ajith Kurian [1 ]
Rajendrakumar, P. K. [1 ]
Lawrence, Deepak K. [1 ]
机构：
[1] Natl Inst Technol Calicut, Dept Mech Engn, Kozhikode 673601, Kerala, India
来源：
TRIBOLOGY INTERNATIONAL | 2022年 / 167卷
关键词：
Grey cast iron cylinder liner; Honing angle; Coefficient of friction; Sliding wear; SURFACE-TOPOGRAPHY; FRICTION; WEAR; OPTIMIZATION; TEXTURE; GROOVES; FINISH;
D O I：
10.1016/j.triboint.2021.107355
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Research conducted on the influence of honing angle on the cylinder liner surface lacks consensus on the numerical value of the honing angle for the desired performance of the liner-ring tribosystem. The paper presents the results of experimental work performed on the cylinder liner samples honed at different angles (20 degrees-100 degrees) to explore the influence of honing angles under boundary lubrication conditions. Experiments conducted at two distinct sliding conditions (0.2 m/s and 0.3 m/s) using a linear reciprocating tribometer indicated 40 degrees as the optimum honing angle based on the evaluation of tribological characteristics such as the coefficient of friction and the wear.
引用
收藏
页数：11
相关论文
共 50 条
  • [1] Experimental investigation into the wear of the cylinder liner-piston ring in engines
    Yingcai, Zhang
    Yun, Lu
    Houjun, Zhang
    TriboTest, 1996, 2 (03): : 281 - 288
  • [2] Effect of grooved cylinder liner depths on the tribological performances of cylinder liner-piston ring
    Yang, Chao Zhen
    Guo, Zhiwei
    Xu, Changkun
    Guo, Zhiwei (zwguo@whut.edu.cn), 1600, Emerald Group Holdings Ltd. (72): : 465 - 471
  • [3] Effect of grooved cylinder liner depths on the tribological performances of cylinder liner-piston ring
    Yang, Chao Zhen
    Guo, Zhiwei
    Xu, Changkun
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (03) : 465 - 471
  • [4] Influence of Surface Groove Width on Tribological Performance for Cylinder Liner-Piston Ring Components
    Rao, Xiang
    Sheng, Chenxing
    Guo, Zhiwei
    Yuan, Chengqing
    TRIBOLOGY TRANSACTIONS, 2019, 62 (02) : 239 - 248
  • [5] Effects of different surface textures on tribological performances of the cylinder liner-piston ring: An experimental study
    Lu, Yanjun
    Kang, Jianxiong
    Zhao, Xiaowei
    Zhang, Yongfang
    Yang, Xinliang
    Chen, Ruibo
    Xing, Zhiguo
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2024, 25 (03) : 545 - 556
  • [6] Effects of different surface grooved cylinder liner on the tribological performance for cylinder liner-piston ring components
    Miao, Jiazhi
    Li, Yongqing
    Rao, Xiang
    Zhu, Libao
    Guo, Zhiwei
    Yuan, Chengqing
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (05) : 581 - 588
  • [7] Effects of Composite surface modification on the tribological characteristics of Cylinder Liner-Piston Ring
    Li Chuang-ye
    Chen Wen-gang
    PROCEEDINGS OF THE 2015 6TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING, 2016, 32 : 1199 - 1204
  • [8] Improving tribological behaviour of piston ring-cylinder liner frictional pair by liner surface texturing
    Grabon, Wieslaw
    Koszela, Waldemar
    Pawlus, Pawel
    Ochwat, Slawomir
    TRIBOLOGY INTERNATIONAL, 2013, 61 : 102 - 108
  • [9] The influence of different surface textures on tribological property for cylinder liner-piston ring during running-in
    Kang, Jianxiong
    Liu, Rui
    Lue, Yanjun
    Yang, Haoran
    Yan, Changfeng
    Liu, Cheng
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2025, 13 (01):
  • [10] Experimental research on the wall-wetting effects on the frictional property of the cylinder liner-piston ring pair
    Xu, Bo
    Yin, Bifeng
    Jia, Hekun
    Wei, Mingliang
    Shi, Kunpeng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2022, 236 (04) : 721 - 731
12345