Spray Characteristics of n-Butanol in a High-Pressure Common-Rail Injection System

被引:8
|
作者
Yi, Bolun [1 ]
Lin, Qizhao [1 ]
Song, Lanbo [1 ]
Fu, Wei [1 ]
Li, Fengyu [1 ]
Liu, Tao [1 ]
机构
[1] Univ Sci & Technol China, Dept Thermal Sci & Energy Engn, 96 Jinzhai Rd, Hefei 230026, Anhui, Peoples R China
基金
中国国家自然科学基金;
关键词
n-Butanol; Diesel; Spray characteristics; LOW-TEMPERATURE COMBUSTION; DIESEL-ENGINE; SOYBEAN BIODIESEL; VEGETABLE-OIL; HOLE INJECTOR; FUEL; ATOMIZATION; ETHANOL; EMISSIONS; CHAMBER;
D O I
10.1061/(ASCE)EY.1943-7897.0000474
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This study was conducted to investigate the spray characteristics of n-butanol, using a diesel spray for comparison. Spray tip penetration and spray cone angle were tested and analyzed. A high-speed photographic system was employed to observe the spray evolution, and a common-rail system and constant-volume chamber were used to change the pressure. The results show that the n-butanol spray penetrates faster than the diesel spray while under the same conditions. The experimental trend lines support the axial development model constructed by Hiroyasu and Arai on the grounds of a similar proportional relation to time after the start of injection, and the empirical equations provide reasonable approximations to the experimental measurements of the spray tip penetration. (c) 2017 American Society of Civil Engineers.
引用
收藏
页数:7
相关论文
共 50 条
  • [31] Finite Element Analysis of High-Pressure Common-Rail Injector Body
    Liu, Ju Yan
    He, Zhi Xia
    Wang, Qian
    Huang, Yun Long
    ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 579 - 582
  • [32] A study on the behavior characteristics of diesel spray by using a high pressure injection system with common rail apparatus
    Jeong-Kuk Yeom
    Hajime Fujimoto
    KSME International Journal, 2003, 17 : 1371 - 1379
  • [33] A study on the behavior characteristics of diesel spray by using a high pressure injection system with common rail apparatus
    Yeom, JK
    Fujimoto, H
    KSME INTERNATIONAL JOURNAL, 2003, 17 (09): : 1371 - 1379
  • [34] Injection diagnosis through common-rail pressure measurement
    Payri, F
    Lujan, JM
    Guardiola, C
    Rizzoni, G
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2006, 220 (D3) : 347 - 357
  • [35] Experimental and Numerical Analysis of DME Spray Characteristics in Common-rail Fuel System
    Jeong, Soo-Jin
    Park, Jung-Kwon
    Lee, Sang-In
    Lim, Ock-Taeck
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2012, 36 (12) : 1151 - 1159
  • [36] Effect of split injection on the macroscopic development and atomization characteristics of a diesel spray injected through a common-rail system
    Lee, Chang Sik
    Lee, Ki Hyung
    Reitz, Roy D.
    Park, Sung Wook
    ATOMIZATION AND SPRAYS, 2006, 16 (05) : 543 - 562
  • [37] Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine
    Kuti, O. A.
    Xiangang, W. G.
    Zhang, W.
    Nishida, K.
    Huang, Z. H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2010, 224 (D12) : 1581 - 1596
  • [38] Simulation study on pressure fluctuation characteristics of a high-pressure common rail system
    Gao, Zi-Guang
    Li, Guo-Xiu
    Xu, Chun-long
    Li, Hong-Meng
    Wang, Min
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2023, 237 (10-11) : 2645 - 2663
  • [39] The Investigation of Geometric Parameters on the Injection Characteristic of the High Pressure Common-Rail Injector
    Wang, Ling
    Li, Guo-Xiu
    Xu, Chun-Long
    Xi, Xing
    Wu, Xiao-Jun
    Sun, Shu-Ping
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2019, 141 (02):
  • [40] Study of the Optimization of Rail Pressure Characteristics in the High-Pressure Common Rail Injection System for Diesel Engines Based on the Response Surface Methodology
    Li, Ruichuan
    Yuan, Wentao
    Xu, Jikang
    Wang, Lin
    Chi, Feng
    Wang, Yong
    Liu, Shuqiang
    Lin, Jianghai
    Zhang, Qingguang
    Chen, Lanzheng
    PROCESSES, 2023, 11 (09)