PREDICTION AND ANALYSIS OF ELECTRIC DISCHARGE MACHINING (EDM) DIE SINKING MACHINING OF PH 15-5 STAINLESS STEEL BY USING TAGUCHI APPROACH

被引：0
|
作者：
Balamurugan, G. [1 ]
Sivasubramanian, R. [1 ]
机构：
[1] Coimbatore Inst Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
来源：
METALURGIJA | 2020年 / 59卷 / 01期
关键词：
EDM; PH15-5; mathematical model; microstructure; Taguchi method; OPTIMIZATION; PARAMETERS;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
EDM is effectively used in many application like aerospace, turbine, medical and etc., due to its non-contact process between work piece and tool. In this study, the important machining process parameters such as peak current, pulse on time, pulse off time and fluid pressure are inspected that incitement to distress the performance of the operation Material removal rate (MRR) and Tool wear rate (TWR). Subsequently tool geometry and materials that are predominantly affect the work piece response factor as Surface roughness (SR). Hence copper electrode with coating of brass material and different tool geometry are also considered. PH15-5 stainless steel precipitated hardening steel was machined up to 5 mm depth with EDM die sinking machine using 27 number of experiments designed
引用
收藏
页码：67 / 70
页数：4
相关论文
共 50 条
  • [41] Investigations, Processing and Analysis of High Temperature Resistant Nickel-Based Alloy with Die-Sinking Electric Discharge Machining Process
    Singh, Riya
    Vashishtha, Govind
    Chauhan, Sumika
    JOURNAL OF MOLECULAR AND ENGINEERING MATERIALS, 2023, 11 (03N04)
  • [42] An Analysis of Machining Response Parameters, Crystalline Structures, and Surface Topography During EDM of Die-Steel Using EDM Oil and Liquid-Based Viscous Dielectrics: A Comparative Analysis of Machining Performance
    Paswan, Kamlesh
    Pramanik, Alokesh
    Chattopadhyaya, Somnath
    Sharma, Shubham
    Singh, Gurminder
    Khan, Aqib Mashood
    Singh, Sunpreet
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2023, 48 (09) : 11941 - 11957
  • [43] An Analysis of Machining Response Parameters, Crystalline Structures, and Surface Topography During EDM of Die-Steel Using EDM Oil and Liquid-Based Viscous Dielectrics: A Comparative Analysis of Machining Performance
    Kamlesh Paswan
    Alokesh Pramanik
    Somnath Chattopadhyaya
    Shubham Sharma
    Gurminder Singh
    Aqib Mashood Khan
    Sunpreet Singh
    Arabian Journal for Science and Engineering, 2023, 48 : 11941 - 11957
  • [44] Machining performance and influence of process parameters on stainless steel 316L using die-sinker EDM with Cu tool
    Singh, Gurpreet
    Bhui, Amandeep S.
    Lamichhane, Yubraj
    Mukhiya, Prabin
    Kumar, Purushottam
    Thapa, Bikram
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2468 - 2476
  • [45] A Thermo-Structural Analysis of Die-Sinking Electrical Discharge Machining (EDM) of a Haynes-25 Super Alloy Using Deep-Learning-Based Methodologies
    Aneesh, T.
    Mohanty, Chinmaya Prasad
    Tripathy, Asis Kumar
    Chauhan, Alok Singh
    Gupta, Manoj
    Annamalai, A. Raja
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2023, 7 (06):
  • [46] Integrated analysis of energy-process parameters relationship in direct energy deposition of 15-5 PH stainless steel
    Pandey, Susheel
    Srivastava, Rajeev
    Narain, Rakesh
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025, 19 (05): : 3593 - 3610
  • [47] A springback minimization study using the experimental design methods for 15-5 PH stainless steel material in the hydroforming process
    Celik, Yusuf
    Ulke, Ibrahim
    Yurdakul, Mustafa
    Ic, Yusuf Tansel
    WORLD JOURNAL OF ENGINEERING, 2024,
  • [48] Alternative to Nitric Acid Passivation of 15-5 and 17-4PH Stainless Steel Using Electrochemical Techniques
    Lara-Banda, Maria
    Gaona-Tiburcio, Citlalli
    Zambrano-Robledo, Patricia
    Delgado-E, Marisol
    Cabral-Miramontes, Jose A.
    Nieves-Mendoza, Demetrio
    Maldonado-Bandala, Erick
    Estupinan-Lopez, Francisco
    G. Chacon-Nava, Jose
    Almeraya-Calderon, Facundo
    MATERIALS, 2020, 13 (12) : 1 - 14
  • [49] Optimization of Process Parameters of Wire Electric Discharge Machining on AISI 4140 Using Taguchi Method and Grey Relational Analysis
    Deshmukh, Swarup S.
    Zubair, Shaikh A.
    Jadhav, Vijay S.
    Shrivastava, Ramakant
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 4261 - 4270
  • [50] PREDICTION OF SURFACE ROUGHNESS IN WIRE CUT ELECTRIC DISCHARGE MACHINING OF AL-FE-SI ALLOY COMPOSITES USING TAGUCHI TECHNIQUE AND REGRESSION ANALYSIS
    Senthamarai, K.
    Selvakumar, S.
    Kannan, Sathish
    Alagarsamy, S. V.
    SURFACE REVIEW AND LETTERS, 2024, 31 (03)
12345