Eutectic growth in Sr modified Al-13%Si alloy under unidirectional solidification

被引：3
|
作者：
Liao, H. C. [1 ,2 ]
Huang, W. R. [1 ,2 ]
Cai, M. D. [2 ,3 ]
机构：
[1] Southeast Univ, Jiangsu Key Lab Adv Metall Mat, Nanjing 211189, Peoples R China
[2] Southeast Univ, Sch Mat Sci & Engn, Nanjing 211189, Peoples R China
[3] Exova Grp Ltd, Houston, TX 77040 USA
来源：
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2011年 / 24卷 / 02期
关键词：
Al-Si alloy; Unidirectional solidification; Eutectic growth; Microstructure; Temperature gradient; Growth velocity; AL-SI ALLOYS; MG CASTING ALLOYS; STRONTIUM; MICROSTRUCTURE; NUCLEATION; BORON;
D O I：
10.1179/1743133610Y.0000000008
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Al-Si castings have attracted tremendous research interest due to their wide application in the automobile industry. The effects of strontium addition, growth velocity and temperature gradient on eutectic growth in Al-13%Si alloy under unidirectional solidification condition are reported. Microstructural analysis revealed that the morphology of eutectic grains (such as plane front, cells and cellular/columnar and equiaxed dendrites) can be controlled by adjusting Sr addition, growth velocity and temperature gradient. Qualitatively, an increase in temperature gradient and/or reductions in growth velocity and Sr addition are beneficial for stabilising plane front eutectic growth. Experimental observations can be explained in the light of a constitutional supercooling criterion for stability of eutectic growth in polyphase alloy.
引用
收藏
页码：102 / 107
页数：6
相关论文
共 50 条
  • [21] Structural transformation and its reversibility in liquid Al-13%Si alloy at high temperatures
    Shandong Univ of Technology, Jinan, China
    Trans Nonferrous Met Soc China, 2 ([d]230-234):
  • [22] Structural transformation and its reversibility in liquid Al-13%Si alloy at high temperatures
    Wang, WM
    Bian, XF
    Qin, JY
    Ye, YF
    Sljusarenko, SI
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1998, 8 (02) : 230 - 234
  • [23] Rapid solidification of acoustically levitated Al-Cu-Si eutectic alloy under laser irradiation
    Yan Na
    Geng Delu
    Hong ZhenYu
    Wei BingBo
    CHINESE SCIENCE BULLETIN, 2011, 56 (09): : 912 - 918
  • [24] Rapid solidification of acoustically levitated Al-Cu-Si eutectic alloy under laser irradiation
    YAN Na
    Science Bulletin, 2011, (09) : 914 - 920
  • [25] Microstructural characterization of unidirectional solidified eutectic Al-Si-Ni alloy
    Boyuk, U.
    Engin, S.
    Marasli, N.
    MATERIALS CHARACTERIZATION, 2011, 62 (09) : 844 - 851
  • [26] Growth mechanism of Al-Si eutectic alloy
    Tezhong Zhuzao Ji Youse Hejin/Special Casting & Nonferrous Alloys, (05): : 9 - 11
  • [27] Multiscale solidification simulation of Sr-modified Al-Si-Mg alloy in die casting
    Zhou, B.
    Laschet, G.
    Eiken, J.
    Behnken, H.
    Apel, M.
    INTERNATIONAL CONFERENCE ON MODELLING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES (MCWASP XV), 2020, 861
  • [28] Heat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloy
    Zhang, Yudong (yudong.zhang@univ-lorraine.fr), 1600, Elsevier Ltd (730):
  • [29] Eutectic Growth Mode of Al-Si Alloy Solidified Under High Pressure
    Li, Li-xin
    Li, Ming
    Wang, Hui-xin
    Yang, Zhong-juan
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 1020 - 1025
  • [30] Divorced eutectic growth in a ternary Al-Mn-Si alloy under microgravity
    Hecht, U
    Fries, SG
    Rex, S
    FIRST INTERNATIONAL SYMPOSIUM ON MICROGRAVITY RESEARCH & APPLICATIONS IN PHYSICAL SCIENCES AND BIOTECHNOLOGY, VOLS I AND II, PROCEEDINGS, 2001, 454 : 565 - 572
12345