Flip chip on board mounting processes using anisotropic conductive adhesives and eutectic solder

被引：2
|
作者：
Zhong, ZW [1 ]
Wong, S [1 ]
机构：
[1] Gint Inst Mfg Technol, Singapore, Singapore
来源：
2ND ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, PROCEEDINGS | 1998年
关键词：
D O I：
10.1109/EPTC.1998.755982
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, flip chip on board evaluations were carried out using Taguchi's design of experiment. Simple but high yield procedures for reworking flip chip on board using anisotropic conductive adhesives and anisotropic conductive films were developed. Underfill and encapsulation processes for flip chip on board using eutectic solder bumps were also evaluated. The flip chips were assembled on test vehicles for temperature cycling and high-temperature high-humidity tests. The reliability performance of the three processes - gold bumps with anisotropic conductive film, anisotropic conductive adhesive, and eutectic solder with underfill is also discussed in this paper.
引用
收藏
页码：76 / 82
页数：7
相关论文
共 50 条
  • [31] Solder alloy selection for flip chip on board
    Rinne, Glenn A.
    Magill, Paul A.
    Machon, Wayne C.
    Mis, J.Daniel
    Baggs, Joseph W.
    Proceedings of the International Symposium and Exhibition on Advanced Packaging Materials Processes, Properties and Interfaces, 1998, : 118 - 122
  • [32] Failure mechanisms of flip chip DCA assembly using eutectic solder
    Tan, Q
    Cole, R
    Mistry, A
    Beddingfield, C
    50TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE - 2000 PROCEEDINGS, 2000, : 69 - 73
  • [33] Anisotropic adhesives for flip-chip bonding
    Kivilahti, J
    Savolainen, P
    JOURNAL OF ELECTRONICS MANUFACTURING, 1995, 5 (04): : 245 - 252
  • [34] Wafer-Level Packages Using Anisotropic Conductive Adhesives (ACAs) Solution for Flip-Chip Interconnections
    Kim, Il
    Jang, Kyung-Woon
    Son, Ho-Young
    Kim, Jae-Han
    Paik, Kyung-Wook
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2011, 1 (05): : 792 - 797
  • [35] Wafer level packages (WLPs) using anisotropic conductive adhesives (ACAs) solution for flip-chip interconnections
    Kim, Il
    Jang, Kyung-Woon
    Son, Ho-Young
    Kim, Jae-Han
    Paik, Kyung-Wook
    58TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, PROCEEDINGS, 2008, : 219 - +
  • [36] Flip-chip interconnection using Anisotropic Conductive Adhesive with lead free nano-solder particles
    Verma, Suresh Chand
    Guan, Wanbing
    Andersson, Cristina
    Gao, Yulai
    Zhai, Qijie
    Liu, Johan
    ESTC 2006: 1ST ELECTRONICS SYSTEMINTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2006, : 282 - +
  • [37] Flip chip interconnects with electroplated, extended eutectic solder
    Glezen, JH
    Naseem, HA
    Fritsch, I
    Ulrich, RK
    Brown, WD
    Schaper, LW
    1998 INTERNATIONAL CONFERENCE ON MULTICHIP MODULES AND HIGH DENSITY PACKAGING, PROCEEDINGS, 1998, : 319 - 323
  • [38] New anisotropic conductive adhesives for low cost and reliable flip chip on organic substrates applications
    Paik, KW
    Yim, MJ
    PROCEEDINGS OF INTERNATIONAL SYMPOSIUM ON ELECTRONIC MATERIALS AND PACKAGING, 2000, : 282 - 288
  • [39] Materials to integrate the solder reflow and underfill encapsulation processes for flip chip on board assembly
    Gamota, Daniel
    Melton, Cindy
    IEEE transactions on components, packaging and manufacturing technology. Part C. Manufacturing, 1998, 21 (01): : 57 - 65
  • [40] Anisotropic Conductive Paste available for flip chip
    Kishimoto, Y
    Hanamura, K
    3RD INTERNATIONAL CONFERENCE ON ADHESIVE JOINING AND COATING TECHNOLOGY IN ELECTRONICS MANUFACTURING 1998, PROCEEDINGS, 1998, : 137 - 143
12345