Unsteady two-phase region evolution of SCO2 centrifugal compressor

被引:2
|
作者
Bao, Wenrui [1 ]
Yang, Ce [1 ]
Geng, Kaihe [1 ]
Fu, Li [1 ]
机构
[1] Beijing Inst Technol, Sch Mech Engn, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
Supercritical carbon dioxide; centrifugal compressor; DMD; unsteady; two-phase region; DYNAMIC-MODE DECOMPOSITION; PERFORMANCE; FLOW; STABILITY; CYCLES;
D O I
10.1177/09544062221115298
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, unsteady numerical simulations of centrifugal compressors with and without volute were carried out. The unsteady two-phase region evolution in the centrifugal compressor is obtained. Large coherent perturbations were revealed by the decomposition of the transient flow data using the dynamic mode decomposition (DMD) approach. The results imply that because of the low static pressure strip LP1, the two-phase region presents a triangular distribution at the blade leading edge (LE) of the pressure surface (PS) side in one impeller rotation period for both a low flow rate and the design flow rate. At a high flow rate, the two-phase region displays a double triangle distribution on the PS side of the blade LE, which is correlated with the low static pressure strips LP1 and LP2. The maximum two-phase region on the PS side of the LE of the blade occurs downstream of the LP1 position. The two-phase region in the tip clearance is deflected along the LP1 trajectory. DMD analysis shows that there are four modes related to the two-phase region in the tip clearance: mean flow mode with a frequency of 0 Hz and three modes with frequencies of 0.5, 1.0, and 1.5 BPF respectively. Furthermore, the circumferential local perturbation region of these four modes has the same deflection trajectory as that of LP1.
引用
收藏
页码:11431 / 11445
页数:15
相关论文
共 50 条
  • [21] Experimental Data of Supercritical Carbon Dioxide (sCO2) Compressor at Various Fluid States
    Hacks, Alexander J.
    Hussein, Ihab Abd El
    Ren, Haikun
    Schuster, Sebastian
    Brillert, Dieter
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2022, 144 (04):
  • [22] A real gas-based throughflow method for the analysis of SCO2 centrifugal compressors
    Shao, Wenyang
    Yang, Jinguang
    Wang, Xiaofang
    Ma, Ziyue
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (10) : 1943 - 1958
  • [23] A study of real-gas effect on SCO2 compressor performance using similitude method
    Xu, Pengcheng
    Zou, Zhengping
    JOURNAL OF THE GLOBAL POWER AND PROPULSION SOCIETY, 2022, 6 : 200 - 212
  • [24] UNSTEADY AERODYNAMICS OF A CENTRIFUGAL COMPRESSOR STAGE - VALIDATION OF TWO DIFFERENT CFD SOLVERS
    Borm, Oliver
    Kau, Hans-Peter
    PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 8, PTS A-C, 2012, : 2753 - 2764
  • [25] Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall
    Zhao HuiJing
    Wang ZhiHeng
    Xi Guang
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2017, 60 (06) : 924 - 934
  • [26] Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall
    HuiJing Zhao
    ZhiHeng Wang
    Guang Xi
    Science China Technological Sciences, 2017, 60 : 924 - 934
  • [27] Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall
    ZHAO HuiJing
    WANG ZhiHeng
    XI Guang
    Science China(Technological Sciences), 2017, 60 (06) : 924 - 934
  • [28] Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall
    ZHAO HuiJing
    WANG ZhiHeng
    XI Guang
    Science China(Technological Sciences), 2017, (06) : 924 - 934
  • [29] An analytical approach for designing sCO2 2 centrifugal compressors using the loss-integrated throughflow method
    da Cruz, Matheus P. M.
    Ferreira, Rafael A. M.
    Coimbra, Carlos F. M.
    Porto, Matheus P.
    APPLIED THERMAL ENGINEERING, 2024, 256
  • [30] Bifurcations in unsteady transonic two-phase flows
    Schnerr, GH
    Adam, S
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 1997, 77 : S303 - S304