Characteristics Measurement of Dense Bubbly Flow based on Laser Scanning

被引：0
|
作者：
Xue, Ting [1 ]
Li, Songlin [1 ]
Li, Zhuping [1 ]
机构：
[1] Tianjin Univ, Coll Elect & Informat Engn, Tianjin Key Lab Proc Measurement & Control, Tianjin 300072, Peoples R China
来源：
2022 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC 2022) | 2022年
基金：
中国国家自然科学基金;
关键词：
dense bubbly flow; laser scanning; bubble velocity; void fraction; three-dimensional reconstruction; COLUMN;
D O I：
10.1109/I2MTC48687.2022.9806520
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
Bubbly flow is a typical flow pattern in gas-liquid two-phase flow, which has an important impact on industrial production. In this paper, combining laser scanning and high-speed photography, three-dimensional scanning of dense bubbly flow is carried out in a rectangular water tank. The bubble velocities in the horizontal and vertical directions are determined based on two-dimensional cross-correlation algorithm, and the latter shows a significantly higher velocity. Meanwhile, the variations of both velocities over time present a smooth fluctuation around the average value within a limited range. Besides, the bubble motion trajectories are established, and three-dimensional flow structure of dense bubbly flow is also reconstructed. The void fraction distribution is then investigated in various directions. Comparing the calculation results with the actual results, the relative error of void fraction is 6.58%.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] A STUDY ON THE MEASUREMENT OF BUBBLE-SIZE DISTRIBUTION IN THE UPWARD BUBBLY FLOW
    HINATA, S
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1984, 27 (228): : 1127 - 1135
  • [42] PIV measurement of turbulent bubbly mixing layer flow with polymer additives
    Ning, Tao
    Guo, Fu-De
    Chen, Bin
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2010, 31 (01): : 58 - 60
  • [43] STUDY ON THE MEASUREMENT OF BUBBLE SIZE DISTRIBUTION IN THE UPWARD BUBBLY FLOW.
    Hinata, Shigeru
    Bulletin of the JSME, 1984, 27 (228): : 1127 - 1135
  • [44] Laser scanning based three dimensional measurement of vegetation canopy structure
    Li, Xudong
    Zhao, Huijie
    Liu, Yang
    Jiang, Hongzhi
    Bian, Yun
    OPTICS AND LASERS IN ENGINEERING, 2014, 54 : 152 - 158
  • [45] An online measurement method based on line laser scanning for large forgings
    Zhang, Y.C. (oldzhang@ysu.edu.cn), 1600, Springer London (70): : 1 - 4
  • [46] An online measurement method based on line laser scanning for large forgings
    Yu-cun Zhang
    Jun-xia Han
    Xian-bin Fu
    Hong-bin Lin
    The International Journal of Advanced Manufacturing Technology, 2014, 70 : 439 - 448
  • [47] An online measurement method based on line laser scanning for large forgings
    Zhang, Yu-cun
    Han, Jun-xia
    Fu, Xian-bin
    Lin, Hong-bin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (1-4): : 439 - 448
  • [48] Precision measurement of cutting edge based on laser scanning confocal microscopy
    College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing
    Jiangsu
    210016, China
    不详
    Jiangsu
    224051, China
    Huanan Ligong Daxue Xuebao, 7 (86-90 and 103):
  • [49] Measurement Method for Vertical Tank Deformation Based on Laser Scanning Principle
    Wang, Jintao
    Wei, Kai
    Zhang, Jingyue
    Tong, Lin
    Bao, Xuesong
    2016 3RD INTERNATIONAL CONFERENCE ON SYSTEMS AND INFORMATICS (ICSAI), 2016, : 583 - 587
  • [50] A new bubbly flow detection and quantification procedure based on optical laser-beam scattering behavior
    Abbaszadeh, Mohammad
    Alishahi, Mohammad Mehdi
    Emdad, Homayoun
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2021, 32 (02)
12345