Numerical Die Life Estimation of a Crack Susceptible Industrial Hot Forging Process

被引：1
|
作者：
Bouguecha, A. [1 ]
Behrens, B. -A. [1 ]
Bonk, C. [1 ]
Rosenbusch, D. [1 ]
Kazhai, M. [1 ]
机构：
[1] Inst Forming Technol & Machines IFUM Hannover, Univ 2, D-30823 Garbsen, Germany
来源：
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) | 2017年 / 1896卷
关键词：
FEA; fatigue life; crack initiation; hot forging; die life estimation;
D O I：
10.1063/1.5008225
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In industrial hot forging processes, the forging dies underlie cyclic thermo-mechanical loads, which can lead to failure of the tools. Besides die wear (abrasive and adhesive) on the surface, fatigue crack initiation with a following fracture of the tool is one of the most frequent failures occurring in hot forging processes. In this study an industrial hot forging process is considered for fatigue analysis. Tool geometry is designed for a defined life time until crack initiated failure of the tool. Material characterization tests in form of tensile tests as well as cylindrical compression tests and low cycle fatigue tests were carried out. The data will be implemented in a commercial software-system to realize a qualitative good prediction of die life regarding crack wiation.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] A PREDICTION METHOD AND IN-PROCESS MONITORING-SYSTEM OF DIE-LIFE IN HOT-FORGING
    MAEKAWA, Y
    HAMAYA, S
    YANG, GB
    TOWARDS WORLD CLASS MANUFACTURING 1993, 1994, 17 : 435 - 446
  • [32] NUMERICAL LIFE PREDICTION OF MECHANICAL FATIGUE FOR HOT FORGING TOOLS
    Mocellin, Katia
    Ferraro, Matthieu
    Velay, Vincent
    Loge, Roland
    Rezai-Aria, Farhad
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 129 - 132
  • [33] Study on investigation of hot forging die wear analysis - An industrial case study
    Rajiev, R.
    Sadagopan, P.
    Prakash, R. Shanmuga
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2752 - 2757
  • [34] Die and process design for hot forging of a gear wheel - a case study
    Henke, T.
    Bambach, M.
    Hirt, G.
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 307 - 316
  • [35] A single stage hot forging process and die set of alternator poles
    Cheng Yang
    Shengdun Zhao
    Jianjun Zhang
    International Journal of Material Forming, 2013, 6 : 511 - 517
  • [36] The study of hot forging process by using lower strength material as die
    Cheng, F. S.
    Hsu, K. K.
    Chen, Y. S.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : S22 - S25
  • [37] A single stage hot forging process and die set of alternator poles
    Yang, Cheng
    Zhao, Shengdun
    Zhang, Jianjun
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2013, 6 (04) : 511 - 517
  • [38] Numerical life prediction of mechanical fatigue for hot forging tools
    Katia Mocellin
    Matthieu Ferraro
    Vincent Velay
    Roland Logé
    Farhad Rézaï-Aria
    International Journal of Material Forming, 2009, 2
  • [39] Influence of flash design upon process parameters of hot die forging
    Tomov, B
    Radev, R
    Gagov, V
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 157 : 620 - 623
  • [40] Direct Heating Billet within Die during Hot Forging Process
    Cheng, Fang-Sung
    Cheng, Yu-Shun
    APPLIED SCIENCE AND PRECISION ENGINEERING INNOVATION, PTS 1 AND 2, 2014, 479-480 : 25 - 29
12345