Near atomic scale quantification of a diffusive phase transformation in (Zn,Mg)O/Al2O3 using dynamic atom probe tomography

被引:7
|
作者
Kirchhofer, Rita [1 ]
Diercks, David R. [1 ]
Gorman, Brian P. [1 ]
机构
[1] Colorado Sch Mines, Colorado Ctr Adv Ceram, Met & Mat Engn, Golden, CO 80401 USA
基金
美国国家科学基金会;
关键词
SPINEL;
D O I
10.1557/jmr.2015.86
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The onset of a diffusive phase transformation in thin film Zn0.70Mg0.29Ga0.01O deposited on c-oriented sapphire (alpha-Al2O3) was explored using dynamic heating experiments in a laser pulsed atom probe tomography (APT) instrument and correlated with transmission electron microscopy (TEM). Specimens were laser irradiated using 100-1000 pJ pulse energies with initial temperatures between 50 and 300 K for up to 8.64 x 10(10) pulses. Using a finite element model, it was possible to estimate the temperatures reached by the specimen during laser pulsing, which were calculated to be 300 K to above 1000 K. Due to the small sample volume, quench rates were estimated to be 10(13) K/s, allowing for nanosecond temporal resolution during the in situ heating experiments. The formation of Mg-spinel (MgAl2O4) at the transparent conductive oxide/alpha-Al2O3 substrate interface was observed using electron diffraction and confirmed by atom probe analysis. Subnanometer spatial resolution in the atom probe data reconstructions allowed for near atomic level diffusion to be observed. This work demonstrates the feasibility of conducting these experiments in situ using a combined TEM and APT instrument.
引用
收藏
页码:1137 / 1147
页数:11
相关论文
共 50 条
  • [31] Size characterization of θ- and α-Al2O3 crystallites during phase transformation
    Wen, HL
    Chen, YY
    Yen, FS
    Huang, CY
    NANOSTRUCTURED MATERIALS, 1999, 11 (01): : 89 - 101
  • [32] AL2O3/AL COMPOSITES FORMED BY THE DIRECTED OXIDATION OF AN AL-MG-ZN ALLOY
    XIAO, P
    DERBY, B
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1993, 12 (03) : 185 - 195
  • [33] Effect of Fe and partial pressure of oxygen on the formation and phase transformation behavior of Al2O3 scale
    Hayashi, S.
    Takada, Y.
    Saeki, I.
    Yamauchi, A.
    Nishiyama, Y.
    Doi, T.
    Kyo, S.
    Sato, M.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (10): : 862 - 868
  • [34] Properties of SiC Ceramics Sintered via Liquid Phase Using Al2O3 + Y2O3, Al2O3 + Yb2O3 and Al2O3 + Dy2O3 as Additives: a Comparative Study
    Ribeiro, Sebastiao
    Ribeiro, Giseli Cristina
    de Oliveira, Marcela Rego
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2015, 18 (03): : 525 - 529
  • [35] Real-time two dimensional dosimetry using Al2O3:C and Al2O3:C,Mg films
    de F. Nascimento, Luana
    Goossens, Jo
    Leblans, Paul
    Sterckx, Paul
    Vanhavere, Filip
    Struelens, Lara
    Akselrod, Mark
    Verellen, Dirk
    Sensors and Actuators, A: Physical, 2021, 318
  • [36] Metastable-Stable Phase Transformation Behavior of Al2O3 Scale Formed on Fe–Ni–Al Alloys
    Shigenari Hayashi
    Yuto Takada
    Suzue Yoneda
    Shigeharu Ukai
    Oxidation of Metals, 2016, 86 : 151 - 164
  • [37] Real-time two dimensional dosimetry using Al2O3 :C and Al2O3 :C,Mg films
    Nascimento, Luana de F.
    Goossens, Jo
    Leblans, Paul
    Sterckx, Paul
    Vanhavere, Filip
    Struelens, Lara
    Akselrod, Mark
    Verellen, Dirk
    SENSORS AND ACTUATORS A-PHYSICAL, 2021, 318
  • [38] Mechanochemical degradation of hexachlorobenzene using Mg/Al2O3 as additive
    Yafeng Ren
    Shaoguo Kang
    Jianxin Zhu
    Journal of Material Cycles and Waste Management, 2015, 17 : 607 - 615
  • [39] Quantification of High-Temperature Transition Al2O3 and Their Phase Transformations
    Kovarik, Libor
    Bowden, Mark
    Andersen, Amity
    Jaegers, Nicholas R.
    Washton, Nancy
    Szanyi, Janos
    ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2020, 59 (48) : 21719 - 21727
  • [40] The Electronic and Optical Properties of Al2O3, MO, and MAl2O4 (M = Zn, Mg)
    Zhang, Fang-Ying
    Zeng, Z.
    You, J. Q.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2010, 10 (08) : 5475 - 5478