EFFECT OF INTERFACIAL BOND ON PERFORMANCE OF NATURAL FLAX FRP CONFINED COIR FIBRE REINFORCED CONCRETE

被引:0
|
作者
Yan, Libo [1 ]
Chouw, Nawawi [1 ]
Jayaraman, Krishnan [2 ]
机构
[1] Univ Auckland, Dept Civil & Environm Engn, Auckland, New Zealand
[2] Univ Auckland, Dept Mech Engn, Auckland, New Zealand
来源
PROCEEDINGS OF THE THIRTEENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOLS 1 AND II | 2014年
关键词
Flax FRP confinement; Fibre reinforced conctete; Bond effect; Compressive behaviour; COMPOSITE TUBES; BEHAVIOR; COLUMN;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Extensive studies showed that the effect of glass/carbon FRP and concrete interfacial bond has an effect on the structural performance of FRP confined concrete structure since the load transfer from FRP to concrete is via the interface. This study experimentally investigated the effect of interfacial bond between flax FRP(FFRP) tubeand coir fibre reinforced concrete (CFRC) on the axial compressive and flexural behavior of FFRP tube encased CFRC (FFRP-CFRC) composite structure. The types of FFRP/CFRC interfacial conditions considered were that the CFRC was confined by (i) normal FFRP tube and (ii) FFRP tube with FFRP/CFRC interlocking, which were termed as normally and interlocked bonded conditions between FFRP and CFRC, respectively. Experimental results show that in both types of bond conditions, the confinement provided by the outer FFRP tube lead to a remarkable increase in ultimate compressive strength, ultimate axial strain and energy absorption capabilities of the concrete. However, the ultimate compressive strength and strain of normal bonded specimen is larger than those in interlocked specimen. The use of interlocking did not reduce the lateral load carrying capability compared with the normal bonded specimen but eliminated the slippage between FFRP and CFRC effectively.
引用
收藏
页码:26 / 32
页数:7
相关论文
共 50 条
  • [31] Optimized flax FRP stirrup in reinforced concrete beam: Material property and shear performance
    Chen, Cheng
    Li, Xue
    Li, Caiwei
    Zhou, Yingwu
    Sui, Lili
    Composite Structures, 2022, 302
  • [32] Concrete laterally confined with fibre-reinforced polymers (FRP): experimental study and theoretical model
    Aire, C.
    Gettu, R.
    Casas, J. R.
    Marques, S.
    Marques, D.
    MATERIALES DE CONSTRUCCION, 2010, 60 (297) : 19 - 31
  • [33] Optimized flax FRP stirrup in reinforced concrete beam: Material property and shear performance
    Chen, Cheng
    Li, Xue
    Li, Caiwei
    Zhou, Yingwu
    Sui, Lili
    COMPOSITE STRUCTURES, 2022, 302
  • [34] Strain rate effect on interfacial bond behaviour between BFRP sheets and steel fibre reinforced concrete
    Yuan, Cheng
    Chen, Wensu
    Pham, Thong M.
    Hao, Hong
    Cui, Jian
    Shi, Yanchao
    COMPOSITES PART B-ENGINEERING, 2019, 174
  • [35] Performance of FRP-Confined Reinforced Concrete Beams Integrated with Solar Cells
    Chen, An
    Alateeq, Ahmed
    INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2023, 21 (03) : 491 - 506
  • [36] Performance of FRP-Confined Reinforced Concrete Beams Integrated with Solar Cells
    An Chen
    Ahmed Alateeq
    International Journal of Civil Engineering, 2023, 21 : 491 - 506
  • [37] Compressive performance of SFCB-reinforced and FRP-confined concrete cylinders
    Tang, Yu
    Wang, Yusheng
    Sneed, Lesley H.
    Sun, Zeyang
    Wu, Zhenling
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 436
  • [38] Effect of Fibre Shapes on Compressive and Bond Strengths of Steel Fibre Reinforced Concrete
    Singh, A.P.
    Singhal, D.
    Journal of the Institution of Engineers (India): Civil Engineering Division, 1998, 79 (03): : 136 - 139
  • [39] Axial strength and deformability of concrete confined with natural fibre-reinforced polymers
    Pimanmas, Amorn
    Hussain, Qudeer
    Panyasirikhunawut, Atipphat
    Rattanapitikon, Winyu
    MAGAZINE OF CONCRETE RESEARCH, 2019, 71 (02) : 55 - 70
  • [40] Effect of bond on the behavior of steel fibre reinforced concrete beams
    Dhakal, R. P.
    Song, H. R.
    ISISS 2005: Innovation & Sustainability of Structures, Vol 1-3, 2005, : 2132 - 2143