Structural and magnetic properties of FeCoMnCrSi multi-principal alloy

被引:2
|
作者
Jangid, Rahul [1 ]
Ainslie, Kenneth B. [1 ]
Kukreja, Roopali [1 ]
机构
[1] Univ Calif Davis, Dept Mat Sci & Engn, Davis, CA 95616 USA
关键词
magnetic properties; thin film; alloy;
D O I
10.1557/jmr.2019.405
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, the magnetic properties of Fe39.8Co19.92Mn20.52Cr14.77Si5 multi-principal element alloy in both bulk and thin films were studied. X-ray diffraction measurements show coexisting face centered cubic (FCC) and hexagonal close packed phases in the bulk and the 500 nm thin films, while only FCC phase is observed in the 65 nm thin film. A four orders of magnitude increase in the magnetic moment is observed for 65 nm thin film compared with the bulk sample. Evolution of magnetization as a function of temperature and applied magnetic field shows multiple magnetic transitions. A paramagnetic to spin glass transition is detected at T-S similar to 390 K for all samples. Further cooling results in a spin glass to ferromagnetic (FM) transition, and the transition temperature, T-F, is dependent on the film thickness. Higher saturation magnetization and transition temperature observed for the thin film samples indicate the stabilization of FM ordering due to thickness confinement.
引用
收藏
页码:981 / 989
页数:9
相关论文
共 50 条
  • [41] Microstructural evolution and nanoindentation creep behavior in a PdAgCuAuPtZn multi-principal elements alloy
    Zhou, Xuan
    Ge, Hualong
    Zhang, Shunmeng
    Fu, Li
    Xia, Zhiwei
    He, Junjie
    Xiong, Kai
    Cheng, Jun
    Liu, Yi
    Ma, Lihua
    Fu, Quan
    Xiong, Zhi
    Mao, Yong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 6130 - 6143
  • [42] Comparison of laser deposition methods for the synthesis of AlxCoCrFeNi multi-principal element alloy
    Sreeramagiri, Praveen
    Alrehaili, Husam
    Wu, Xin
    Dinda, Guru
    Balasubramanian, Ganesh
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 1090 - 1101
  • [43] Microstructural verification of the theoretically designed novel eutectic multi-principal element alloy
    Talluri, Gopi
    Nagini, M.
    Babu, D. Arvindha
    Murty, B. S.
    Maurya, R. S.
    MATERIALS LETTERS, 2023, 344
  • [44] A multi-principal element alloy combining high specific strength and good ductility
    Moraes Junior, Jose Mauro
    Chaia, Nabil
    Cotton, James Dean
    Coelho, Gilberto Carvalho
    Nunes, Carlos Angelo
    MATERIALS LETTERS, 2022, 325
  • [45] Activation Energy and High Temperature Oxidation Behavior of Multi-Principal Element Alloy
    Grewal, Harpreet Singh
    Sanjiv, Ramachandran Murali
    Arora, Harpreet Singh
    Kumar, Ram
    Ayyagari, Aditya
    Mukherjee, Sundeep
    Singh, Harpreet
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (11)
  • [46] On the microstructure, corrosion behavior and surface films of the multi-principal element alloy CrNiTiV
    O'Brien, S. P.
    Darwish, A. A.
    DelVecchio, E.
    Mehta, R. M.
    Birbilis, N.
    Gupta, R. K.
    ELECTROCHIMICA ACTA, 2024, 505
  • [47] Designing a eutectic multi-principal element alloy for strength-ductility synergy
    Talluri, Gopi
    Nagini, M.
    Babu, D. Arvindha
    Palguna, Yasam
    Rajesh, Korla
    Murty, B. S.
    Maurya, R. S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 976
  • [48] Grain-size effects on the deformation in nanocrystalline multi-principal element alloy
    Roy, Ankit
    Devanathan, Ram
    Johnson, Duane D.
    Balasubramanian, Ganesh
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 277
  • [49] A refractory multi-principal element alloy with superior elevated-temperature strength
    Zhao, Bojun
    Chen, Guoqing
    Lv, Shasha
    Fu, Xuesong
    Zhou, Wenlong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 896
  • [50] A database of multi-principal element alloy phase-specific mechanical properties measured with nano-indentation
    Gienger, Edwin
    Rokisky, Justin
    Yin, Denise
    Pogue, Elizabeth A.
    Piloseno, Bianca
    DATA IN BRIEF, 2024, 55