Influence of silicon on the corrosion behaviour of Al-Zn-In-Mg-Ti sacrificial anode

被引：36
|
作者：
Wen, Jiuba [1 ]
He, Junguang [1 ,2 ]
Lu, Xianwen [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China
[2] Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Peoples R China
来源：
CORROSION SCIENCE | 2011年 / 53卷 / 11期
关键词：
Aluminium; TEM; Polarisation; Weight loss; Pitting corrosion; ELECTROCHEMICAL-BEHAVIOR; LOCALIZED CORROSION; ALUMINUM; ACTIVATION; ALLOY; MICROSTRUCTURE; SOLIDIFICATION; IONS;
D O I：
10.1016/j.corsci.2011.07.039
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Si on the corrosion behaviour of Al-5Zn-0.03In-1Mg-0.05Ti (wt.%) alloy was investigated by the microstructure observation and electrochemical measurements in order to improve its corrosion non-uniform and electrochemical properties. The main precipitates in Al-5Zn-0.03In-1Mg-0.05Ti-0.1Si (wt.%) alloy is Mg2Si phase, which decrease the galvanic corrosion because the potential difference between Mg2Si and a-Al is smaller than that between MgZn2 and a-Al. The addition of Si improves the corrosion uniformity of the anode due to the fine equiaxed grains and grain boundaries where Mg2Si particles uniformly distributed. The results indicate that the microstructure, electrochemical characteristics and corrosion uniformity can be improved significantly after adding 0.1 wt.% Si into Al-5Zn-0.03In-1Mg-0.05Ti (wt.%) alloy. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3861 / 3865
页数：5
相关论文
共 50 条
  • [31] Influence of silicon coating on the corrosion resistance of Zn-Al-Mg-RE-Si alloy
    Liu Kuiren
    Ma Pengcheng
    Pu Nianwen
    Chen Jianshe
    Han Qing
    JOURNAL OF RARE EARTHS, 2010, 28 : 378 - 381
  • [32] Influence of silicon coating on the corrosion resistance of Zn-Al-Mg-RE-Si alloy
    刘奎仁
    马鹏程
    蒲年文
    陈建设
    韩庆
    JournalofRareEarths, 2010, 28(S1) (S1) : 378 - 381
  • [33] The influence of temperature on the performance of Al-Zn-In-Sn-Mg sacrificial anodes
    Qu, J.
    Qi, G.
    Zhang, L.
    Yang, X.
    Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 2001, 29 (08): : 102 - 104
  • [34] Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al–Zn
    D.R. Salinas
    S.G. García
    J.B. Bessone
    Journal of Applied Electrochemistry, 1999, 29 : 1063 - 1071
  • [35] Fatigue crack propagation behaviour and corrosion resistance of Al-Zn-Mg-Cu-Ti(-Sn) alloys
    Yan, A.
    Chen, L.
    Liu, H. S.
    Li, X. Q.
    MATERIALS SCIENCE AND TECHNOLOGY, 2013, 29 (03) : 319 - 325
  • [36] Effect of Precipitation Hardening Treatment on Corrosion Behavior and Anodic Efficiency of Sacrificial Anode Produced from Recycled Al-Zn-Mg Alloy
    Abubakar, Muazu
    Onimisi, Muhammed Abdulrasheed
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2021, 21 (04) : 1212 - 1219
  • [37] Influence of heat treatment on corrosion behaviour of Al-Zn-Mg-Cu-Zr-Sc alloy
    Xiao, Y. P.
    Pan, Q. L.
    Li, W. B.
    Liu, X. Y.
    He, Y. B.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (05): : 421 - 430
  • [38] Transmission electron microscopy observations on the precipitates in Al-Zn-Mg based sacrificial anode alloy
    Ma Jingling
    Wen Jiuba
    Li Quanan
    Li Junfeng
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 989 - 992
  • [39] 组织状态对Al-Zn-In-Mg-Ti合金电化学性能的影响
    文九巴
    李元侦
    赵胜利
    马景灵
    卢现稳
    腐蚀科学与防护技术, 2010, 22 (05) : 395 - 399
  • [40] Influence of alloying elements and microstructure on aluminium sacrificial anode performance:: case of Al-Zn
    Salinas, DR
    García, SG
    Bessone, JB
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 1999, 29 (09) : 1063 - 1071
12345