Enhancing Pozzolanic Properties of Rice Husk Ash Using Acid Leaching Treatment

被引:2
|
作者
Wong, Yong Seng [1 ]
Kwan, Wai Hoe [1 ]
Lim, Min [1 ]
机构
[1] Univ Tunku Abdul Rahman, Dept Construct Management, Kampar, Negeri Perak, Malaysia
来源
INTERNATIONAL SYMPOSIUM GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019) | 2019年 / 2157卷
关键词
PERFORMANCE; CONCRETE;
D O I
10.1063/1.5126562
中图分类号
Q81 [生物工程学(生物技术)]; Q93 [微生物学];
学科分类号
071005 ; 0836 ; 090102 ; 100705 ;
摘要
Rice husk ash (RHA) is one of the major agricultural wastes in rice producing countries. Approximate 20% of the total amount of paddy is rice husk (RH) which will be generating 120 Mtons annually. This causes a serious disposal problem due to low commercial interest. The presence of metallic impurities (Na2O and K2O) in non-treated RHA can trigger alkali reaction in hardened concrete. Acid leaching treatment prior to combustion is proposed in this study as an effective approach to remove the metallic impurities. HC1 acid solutions with different concentrations, namely 1.0M, 0.1M and 0.01M were prepared to leach RH for 2 hours at constant temperature of 80 degrees C. The rice husk was then dried in room temperature and combusted at 800 degrees C for 2 hours using electrical furnace. The characterization studies of the acid leached rice husk ash (ATRHA) were done by x-ray fluorescent (XRF), x-ray diffraction (XRD) and loss on ignition (LOI). Result shows that RHA leached with 1.0M of HC1 at 80 degrees C for 2 hours followed by the controlled combustion process at 800 degrees C for 2 hours (ATRHA3) effectively removed impurities and produced RHA which contained > 98% of pure amorphous silica. In addition, the LOI result shows that there is a 5.24% reduction of un-burnt carbon content inATHRA3 sample compared to control specimen.
引用
收藏
页数:5
相关论文
共 50 条
  • [41] Properties of geopolymer with seeded fly ash and rice husk bark ash
    Nazari, Ali
    Bagheri, Ali
    Riahi, Shadi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24): : 7395 - 7401
  • [42] Rice Husk Ash and Fly Ash Effects on the Mechanical Properties of Concrete
    Bheel, Naraindas
    Jokhio, Muneer Ali
    Abbasi, Javed Ahmed
    Lashari, Hyder Bux
    Qureshi, Muhammad Imran
    Qureshi, Abdul Salam
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2020, 10 (02) : 5402 - 5405
  • [43] Effects of Rice Husk Ash and Bagasse Ash on Properties of Expended Clay
    Janbuala, Sutas
    Eambuala, Mana
    Ardpasa, Adchara
    INTERNATIONAL CONFERENCE ON CIVIL, MECHANICAL AND MATERIAL ENGINEERING (ICCMME 2018), 2018, 1973
  • [44] The Effect of Rice Husk Ash on Properties of Aerated Concrete
    Kunchariyakun, K.
    Asawapisit, S.
    Sombatsompop, K.
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES IV, 2013, 747 : 420 - 423
  • [45] Chemical and Mineralogical Properties of Rice Husk Ash (RHA)
    Hassan, Jamo Usman
    Noh, Mohamad Zaky
    Ahmad, Zainal Arifin
    JURNAL TEKNOLOGI, 2014, 70 (05):
  • [46] PROPERTIES OF SILICA FROM RICE HUSK AND RICE HUSK ASH AND THEIR UTILIZATION FOR ZEOLITE Y SYNTHESIS
    Saceda, Jan-Jezreel F.
    de Leon, Rizalinda L.
    Rintramee, Kamolwan
    Prayoonpokarach, Sanchai
    Wittayakun, Jatuporn
    QUIMICA NOVA, 2011, 34 (08): : 1394 - U289
  • [47] Influence of Rice Husk Ash on the properties of Concrete: a Review
    Peng, Gai Fei
    Yang, Juan
    PROCEEDINGS OF THE 2016 INTERNATIONAL FORUM ON ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT (IFEESD), 2016, 75 : 143 - 149
  • [48] Performance evaluation of structural properties for soil stabilised using rice husk ash
    Anupam, Aditya Kumar
    Kumar, Praveen
    Ransingchung R. N., G. D.
    ROAD MATERIALS AND PAVEMENT DESIGN, 2014, 15 (03) : 539 - 553
  • [49] PROPERTIES OF CEMENT PASTE CONTAINING RICE HUSK ASH
    HWANG, CL
    WU, DS
    FLY ASH, SILICA FUME, SLAG, AND NATURAL POZZOLANS IN CONCRETE, VOL 1-2, 1989, 114 : 733 - 762
  • [50] Effect of Rice Husk Ash Fineness on the Properties of Concrete
    Jayanti, Dewi Sri
    Jaya, Ramadhansyah Putra
    Hassan, Norhidayah Abdul
    Aziz, Md. Maniruzzaman A.
    Hainin, Mohd Rosli
    Ibrahim, Mohd Haziman Wan
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 203 - +