Appearance of a hard layer (α-case) on the surface of Ti-6Al-4V surgical implant castings

被引：4

作者：

Miskovic, Z ^{[1
]}

Dimcic, B ^{[1
]}

Bobic, I ^{[1
]}

Zec, S ^{[1
]}

Jovanovic, MT ^{[1
]}

机构：

[1] Vinca Inst Nucl Sci, Belgrade 11001, Serbia Monteneg

来源：

CURRENT RESEARCH IN ADVANCED MATERIALS AND PROCESSES | 2005年 / 494卷

关键词：

beta phase; hardness; oxygen; thickness;

D O I：

10.4028/www.scientific.net/MSF.494.561

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Light microscopy, scanning electron microscopy (SEM) and X-ray diffraction analysis combined with macro and microhardness measurements were performed to characterize a hard layer (alpha-case) forming on the surface of Ti-6Al-4V surgical implants castings. The thickness of alpha-case was found to be approximately 200 mu m, while its hardness was two times higher than the hardness in the core of castings. No presence of the beta phase was detected in the alpha-case.

引用

页码：561 / 566

页数：6

共 50 条

[21] Tribological behaviors of Ti-6Al-4V alloy with surface plasma molybdenized layer
Liang, Wen-ping
Miao, Qiang
Ben, Neng-jun
Ren, Bei-lei
SURFACE & COATINGS TECHNOLOGY, 2013, 228 : S249 - S253
[22] Liquid-phase aluminizing of Ti-6Al-4V with a nanostructured surface layer
Ma, Y.
Mei, Q. S.
Liu, M.
Chen, F.
Yang, X. Y.
Li, J. Y.
MATERIALS LETTERS, 2017, 193 : 169 - 171
[23] Changes in surface composition of the Ti-6Al-4V implant alloy by cultured macrophage cells
Lin, HY
Bumgardner, JD
APPLIED SURFACE SCIENCE, 2004, 225 (1-4) : 21 - 28
[24] Diffusion bonding of steel to Ti-6Al-4V to produce hard wearing surface layers
J Vac Sci Technol A, 3 pt 2 (1885):
[25] Diffusion bonding of steel to Ti-6Al-4V to produce hard wearing surface layers
Church, SC
Wild, RK
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1998, 16 (03): : 1885 - 1889
[26] Effect of mean stress on fretting fatigue of Ti-6Al-4V on Ti-6Al-4V
Lovrich, NR
Neu, RW
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (01) : 41 - 55
[27] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
Ferdinandov, Nikolay Vasilev
Gospodinov, Danail Dimitrov
Ilieva, Mariana Dimitrova
Radev, Rossen Hristov
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
[28] The GTAW of Ti-6Al-4V castings and its effect on microstructural and mechanical properties
James Ault
James Pillers
Stewart Veeck
JOM, 2005, 57 : 62 - 65
[29] FATIGUE CRACK INITIATION IN HOT ISOSTATICALLY PRESSED TI-6AL-4V CASTINGS
EYLON, D
JOURNAL OF MATERIALS SCIENCE, 1979, 14 (08) : 1914 - 1922
[30] The GTAW of Ti-6Al-4V Castings and Its Effect on Microstructural and Mechanical Properties
Ault, James
Pillers, James
Veeck, Stewart
JOM, 2005, 57 (11) : 62 - 65

← 1 2 3 4 5 →