Wettability effect on pool boiling heat transfer using a multiscale copper foam surface

被引:101
|
作者
Shi, Juan [1 ]
Jia, Xi [1 ]
Feng, Dongyang [1 ]
Chen, Zhenqian [1 ]
Dang, Chaobin [2 ]
机构
[1] Southeast Univ, Sch Energy & Environm, Nanjing 210096, Jiangsu, Peoples R China
[2] Univ Tokyo, Grad Sch Frontier Sci, Inst Environm Studies, 5-1-5 Kashiwanoha, Kashiwa, Chiba 2778563, Japan
基金
中国国家自然科学基金;
关键词
Wettability; Copper foam; Pool boiling; Multiscale surface interactions; WATER; FLUX;
D O I
10.1016/j.ijheatmasstransfer.2019.118726
中图分类号
O414.1 [热力学];
学科分类号
摘要
To improve thermal performance, the wettability effect on pool boiling heat transfer using copper foam is experimentally studied. A surface oxidation and chemical modification method is employed to modify copper foam surface's wettability. After wettability treatment, the copper foam surface is covered with nanosheet. The average contact angle on 50 PPI super-hydrophobic and super-hydrophilic copper foam surface is 148.7 degrees and nearly 0 degrees, respectively. An experimental platform regarding the thermal performance of subcooled pool boiling heat transfer for deionized water on copper foam with a modified wettability surface is conducted. Results showed that the super-hydrophilic copper foam's surface achieves better boiling heat transfer performance in a medium- or high-heat flux region (q >= 20 W.cm(-2)), while super hydrophobic copper foam surface shows a better performance when q < 20 W.cm(-2). The pool boiling enhancement of wettability-modified surface has been verified compared with flat surface from public work. The maximum heat transfer coefficient in this experiment reaches 19,238 W.m(-2).K-1 for super-hydrophilic surface (50 PPI, 2 mm thickness) at a heat flux of 96 W.cm(-2). The bubble dynamic behavior during pool boiling is observed through a high-speed camera. The visualization showed that the shape, size and number of bubbles on super-hydrophilic copper foam surface during pool boiling are different from that on super-hydrophobic copper foam surface due to different adhesion force and surface tension. As copper foam thickness increases, more bubbles are trapped in the copper foam. By analyzing the heat transfer mechanism in copper foam, it is deduced that the specific copper foam structure conveys a larger heat transfer area, and meanwhile, the micro-nanostructure provides an abundance of nucleation sites. Moreover, a super-hydrophilic surface could promote liquid replenishment for the copper foam. Therefore, wettability-modified copper foam shows great promise in thermal management. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] Model for surface wettability effect on transition boiling heat transfer
    Pan, Chin
    Lin, T.L.
    Heat Transfer, Proceedings of the International Heat Transfer Conference, 1990,
  • [22] Lattice Boltzmann simulations for surface wettability effects in saturated pool boiling heat transfer
    Gong, Shuai
    Cheng, Ping
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 85 : 635 - 646
  • [23] Pool boiling heat transfer of ultra-light copper foam with open cells
    Xu, Jinliang
    Ji, Xianbing
    Zhang, Wei
    Liu, Guohua
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2008, 34 (11) : 1008 - 1022
  • [24] Effects of Wettability on Pool Boiling Heat Transfer of Micro/Nano-Composite Surface
    Chai Y.-Z.
    Zhang W.
    Zhao Y.-D.
    Li Y.
    Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities, 2017, 31 (04): : 984 - 990
  • [25] Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism
    Phan, Hai Trieu
    Caney, Nadia
    Marty, Philippe
    Colasson, Stephane
    Gavillet, Jerome
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (23-24) : 5459 - 5471
  • [26] On the role of confinement plate wettability on pool boiling heat transfer
    Sarode, Ajinkya
    Raj, Rishi
    Bhargav, Atul
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 156
  • [27] Effects of difference in wettability level of biphilic patterns on copper tubes in pool boiling heat transfer
    Cheng, Hui-Chung
    Jiang, Zong-Xun
    Chang, Tien-Li
    Chen, Ping-Hei
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2021, 120
  • [28] Surface Wettability effects on Boiling Heat Transfer
    Nithyanandam, T.
    Kumar, D. Senthil
    Aravinth, K.
    Ajith, V.
    RENEWABLE ENERGY SOURCES AND TECHNOLOGIES, 2019, 2161
  • [29] Effect of hydrophilicity and hydrophobicity on pool boiling heat transfer characteristics on metal foam
    Lin S.
    Zhao Y.
    Lyu Z.
    Lai Z.
    Hu H.
    Huagong Xuebao/CIESC Journal, 2021, 72 : 295 - 301
  • [30] Augmentation of pool boiling heat transfer on tube bundles using metal foam
    Muneeshwaran, M.
    Yang, Cheng-Min
    Cakmak, Ercan
    Nawaz, Kashif
    APPLIED THERMAL ENGINEERING, 2024, 236