Rotor Position Estimation Error Analysis of Indirect High Frequency Signal Injection Method for Sensorless Starting Control of Aircraft Starter-Generator

被引:0
|
作者
Lu, Heng [1 ]
Wei, Jiadan [1 ]
Xue, Hua [1 ]
Zhang, Zhuoran [1 ]
Kong, Xianghao [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Dept Elect Engn & Its Automat, Nanjing, Peoples R China
关键词
Indirect high frequency signal injection; three-stage brushless synchronous machine; error analysis; compensation method;
D O I
10.1109/ecce.2019.8912841
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This paper introduced an indirect high frequency signal injection (IHFSI) method of rotor position estimation for three-stage brushless synchronous machine (TSBSM). Since the resulting high frequency signal flows through the nonlinear rotary rectifier, and the band-pass filer(BPF) and low-pass filter(LPF) should be employed for the response signals extraction, the influence of these involved links on rotor position estimation error is investigated, the compensation for the signal estimation is proposed to reduce the error for the higher starting performance. The simulation and experiment results demonstrate the effectiveness of the reduction of the estimated rotor position error compared to the original method in the starting procedure.
引用
收藏
页码:1846 / 1851
页数:6
相关论文
共 50 条
  • [31] Position sensorless control of IPMSM based on rotating high frequency signal method
    Yu, Yanjun
    Chai, Feng
    Ou, Jing
    Gao, Hongwei
    Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, 2013, 28 (07): : 26 - 31
  • [32] Influence of Speed EMF on Position Estimation Error in Carrier Signal Injection Based Sensorless Control of PMSM
    Wang Jianmin
    Gao Jianwei
    2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012), 2012,
  • [33] Initial Rotor Position Estimation Method for a Wound-rotor Synchronous Starter/Generator Based on Voltage Pulse Injection and Fourier Fitting
    Wang R.
    Liu W.
    Sun C.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2022, 42 (05): : 1981 - 1991
  • [34] A Simplified Method to Estimate the Rotor Position Using the High Frequency Voltage Signal Injection
    Yoon, Tae-Min
    Sim, Hyun-Woo
    Lee, June-Seok
    Lee, Kyo-Beum
    2014 TWENTY-NINTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2014, : 2453 - 2458
  • [35] Analysis on Position Estimation Error in Position-Sensorless Operation of IPMSM Using Pulsating Square Wave Signal Injection
    Hwang, Chae-Eun
    Lee, Younggi
    Sul, Seung-Ki
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2019, 55 (01) : 458 - 470
  • [36] Rapid Demodulation of Rotor Position for High Frequency Voltage Injection Based IPM Machine Sensorless Control
    Wang, Tianhao
    Xu, John
    2015 IEEE 11TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS (PEDS 2015), 2015, : 873 - 879
  • [37] Position-Sensorless MTPA Control of IPMSM Based on High-Frequency Signal Injection
    Lee, Younggi
    Sul, Seung-Ki
    2019 10TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ECCE ASIA (ICPE 2019 - ECCE ASIA), 2019,
  • [38] Initial Rotor Position Estimation of IPMSM Based on Improved Rotating High Frequency Signal Injection
    Li Ning
    Dong Lei
    You Yuyang
    Gao Yang
    Liao Xiaozhong
    2014 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO (ITEC) ASIA-PACIFIC 2014, 2014,
  • [39] Initial rotor position estimation of permanent magnet synchronous motor based on high frequency voltage signal injection method
    Wan, Shan-Ming
    Wu, Fang
    Huang, Sheng-Hua
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2008, 28 (33): : 82 - 86
  • [40] Sensorless position control of active magnetic bearings based on high frequency signal injection with digital signal processing
    Yim, JS
    Sul, SK
    Ahn, HJ
    Han, DC
    APEC 2004: NINETEENTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1-3, 2004, : 1351 - 1354