The influence of pure Na on the microstructure and tensile properties of Al-Mg2Si metal matrix composite

被引：83

作者：

Emamy, M. ^{[1
]}

Khorshidi, R. ^{[2
]}

Raouf, A. Honarbakhsh ^{[2
]}

机构：

[1] Univ Tehran, Sch Met & Mat, Tehran 113654563, Iran

[2] Semnan Univ, Fac Engn, Dept Mat, Semnan, Iran

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 13-14期

关键词：

Mechanical characterization; Al/Mg2Si composites; Casting; Fracture; GROWTH; SILICON; MG2SI;

D O I：

10.1016/j.msea.2011.02.010

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In current research, the influence of different concentrations of Na (0.01-0.2 wt.%) on the microstructure and tensile properties of Al-15 wt.%Mg2Si in situ metal matrix composite has been investigated. It was found that 0.1 wt.% Na addition changes the morphology of primary Mg2Si irregular or dendritic to polyhedral shape and its average particle size decreases from 32 mu m to 7 mu m. Microstructural studies also showed that the morphology of the eutectic Mg2Si phase alters from flake-like to very short fibrous or dot-like. Further investigations on tensile tests revealed optimum Na level (0.1%) for improving both UTS and elongation values. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：4337 / 4342

页数：6

共 50 条

[31] Improving microstructure and mechanical properties of hypoeutectic Al-Mg2Si alloy by Gd addition
Wang, Ke-Yan
Zhao, Rong-Da
Wu, Fu-Fa
Wu, Xiao-Feng
Chen, Ming-Hua
Xiang, Jun
Chen, Shun-Hua
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 813
[32] Microstructure Evolution and Performance Improvement of Hypereutectic Al-Mg2Si Metallic Composite with Ca or Sb
Zuo, Min
Ren, Boda
Xia, Zihan
Ma, Wenwen
Lv, Yidan
Zhao, Degang
MATERIALS, 2020, 13 (12)
[33] Correlating the microstructure to mechanical properties and wear behavior of an accumulative back extruded Al-Mg2Si in-situ composite
Ebrahimi, M.
Zarei-Hanzaki, A.
Abedi, H. R.
Azimi, M.
Mirjavadi, S. S.
TRIBOLOGY INTERNATIONAL, 2017, 115 : 199 - 211
[34] Modification of Al-Mg2Si In-Situ Composite by Boron
Azarbarmas, Mortaza
Emamy, Masoud
Rassizadehghani, Jafar
Alipour, Mohammad
Karamouz, Mostafa
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 843 - 850
[35] The influence of Cu rich intermetallic phases on the microstructure, hardness and tensile properties of Al-15% Mg2Si composite
Emamy, M.
Nemati, N.
Heidarzadeh, A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2998 - 3004
[36] The influence of Ni addition and hot-extrusion on the microstructure and tensile properties of Al-15% Mg2Si composite
Emamy, M.
Khodadadi, M.
Raouf, A. Honarbakhsh
Nasiri, N.
MATERIALS & DESIGN, 2013, 46 : 381 - 390
[37] Influence of solution heat treatment and ageing on microstructure and properties of in-situ Mg2Si/Mg-Al matrix composite
Jia, Shu-Zhuo
Xu, Chun-Jie
Guo, Xue-Feng
Zheng, Shui-Yun
Zhang, Zhong-Ming
Lu, Tao
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2006, 27 (06): : 25 - 28
[38] The effect of solution temperature on the microstructure and tensile properties of Al-15%Mg2Si composite
Malekan, A.
Emamy, M.
Rassizadehghani, J.
Emami, A. R.
MATERIALS & DESIGN, 2011, 32 (05) : 2701 - 2709
[39] Effect of Mn addition on the microstructure and tensile properties of Al-15%Mg2Si composite
Ghorbani, M. R.
Emamy, M.
Khorshidi, R.
Rasizadehghani, J.
Emami, A. R.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 550 : 191 - 198
[40] Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg2Si metal matrix composite—ANFIS and RSM approaches
Mehdi Hourmand
Ahmed A. D. Sarhan
Saeed Farahany
Mohd Sayuti
The International Journal of Advanced Manufacturing Technology, 2019, 101 : 2723 - 2737

← 1 2 3 4 5 →