Fretting Fatigue Cracking of a Center Guide Bolt Supporting the Combustion Chamber in a Heavy-duty Gas Turbine Engine

被引：0
|
作者：
Neidel, A. [1 ]
Fischer, B. [1 ]
Gaedicke, T. [1 ]
机构：
[1] Siemens AG, Energy Sect, Gasturbinenwerk Berlin, Werkstoffpruflab, Huttenstr 12, D-10548 Berlin, Germany
来源：
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY | 2018年 / 55卷 / 03期
关键词：
PREDICTION;
D O I：
10.3139/147.110498
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The slotted center guide bolt of the center guide feature of the lower part of the outer shell of an annular combustion chamber was found fractured in a heavy-duty gas turbine engine used for power generation, after approximately 5.500 operating hours. The incident was a one-off event and not a recurring incident. No similar events were reported from the fleet; hence the failure was not considered a field issue. The metallurgical root cause investigation that was ordered to determine the failure mechanism revealed that the incident center guide bolt failed by fretting fatigue cracking, a high cycle fatigue (HCF) phenomenon.
引用
收藏
页码：158 / 175
页数：18
相关论文
共 50 条
  • [21] Degradation analysis of a heavy-duty gas turbine engine under full and part load conditions
    Najjar, Yousef S. H.
    Alalul, Osama F. A.
    Abu-Shamleh, Amer
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2020, 44 (06) : 4529 - 4542
  • [22] GASEOUS, PARTICULATE, AND SMOKE EMISSIONS FROM A HEAVY-DUTY AUTOMOTIVE GAS-TURBINE ENGINE
    SHIH, T
    SMITH, G
    SPRINGER, G
    ENVIRONMENTAL SCIENCE & TECHNOLOGY, 1979, 13 (07) : 855 - 859
  • [23] Prediction model of NOx emissions in the heavy-duty gas turbine combustor based on MILD combustion
    Zhao, Qiaonan
    Liu, Feng
    Jiao, Anyao
    Yang, Qiguo
    Xu, Hongtao
    Liao, Xiaowei
    ENERGY, 2023, 282
  • [24] An Investigation of the Combustion Process of a Heavy-Duty Natural Gas-Diesel Dual Fuel Engine
    Li, Hailin
    Liu, Shiyu
    Liew, Chetmun
    Gatts, Timothy
    Wayne, Scott
    Clark, Nigel
    Nuszkowski, John
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2018, 140 (09):
  • [25] An investigation of the combustion process of a heavy-duty dual fuel engine supplemented with natural gas or hydrogen
    Li, H.
    Liu, S.
    Liew, C.
    Gatts, T.
    Wayne, S.
    Clark, N.
    Nuszkowski, J.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (05) : 3352 - 3362
  • [26] Combustion and emissions of a Euro VI heavy-duty natural gas engine using EGR and TWC
    Zhang, Qiang
    Xu, Zishun
    Li, Menghan
    Shao, Sidong
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2016, 28 : 660 - 671
  • [27] Combustion sensitivity to the nozzle hole size in an active pre-chamber ultra-lean heavy-duty natural gas engine
    Onofrio, Gessica
    Napolitano, Pierpaolo
    Tunestal, Per
    Beatrice, Carlo
    ENERGY, 2021, 235
  • [28] Effect of pre-chamber fuel injection parameters and EGR on the combustion and emissions of a heavy-duty diesel engine
    Lu, Yingying
    Chen, Yufeng
    Zhang, Daochen
    Zhong, Lingfeng
    Qian, Yi
    Pei, Yiqiang
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2024, 46 (01) : 6662 - 6684
  • [29] NUMERICAL INVESTIGATION OF REHEAT HYDROGEN FLAMES IN THE SEQUENTIAL-COMBUSTION STAGE OF A HEAVY-DUTY GAS TURBINE
    Gruber, Andrea
    Meyer, Ole H. H.
    Heggset, Tarjei
    Wood, Birute
    Ciani, Andrea
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 3B, 2024,
  • [30] Combustion process and emissions of a heavy-duty engine fueled with directly injected natural gas and pilot diesel
    Zhang, Qiang
    Li, Menghan
    Shao, Sidong
    APPLIED ENERGY, 2015, 157 : 217 - 228
12345