Fatigue properties of pack ply-rolling Ti-6Al-4V alloy sheets

被引：0
|
作者：
Hong Quan [1 ]
Yang Guan-jun [1 ]
Zhao Yong-qing [1 ]
Qi Yun-lian [1 ]
Guo Ping [1 ]
机构：
[1] NW Inst Nonferrous Met Res, Xian 710016, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2007年 / 17卷
关键词：
Ti-6Al-4V alloy; pack ply-rolling; sheet; texture; fatigue properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of pack ply-rolling process and heat-treatment on the texture characteristics of Ti-6Al-4V alloy sheets was investigated applying the EBSD technique. The tensile properties and fatigue properties of the sheets possessing different type textures were measured. The results show that the alloy sheets possessing single type texture (B or T) exhibit lower fatigue strength compared with the mixed texture (B/T). The sheet possessing basal texture exhibits isotropy and its elastic modulus and yield strength are lower than those under other conditions.
引用
收藏
页码：S218 / S222
页数：5
相关论文
共 50 条
  • [31] The effect of hot rolling condition on the anisotropy of mechanical properties in Ti-6Al-4V alloy
    Song, Jin-Hwa
    Hong, Ki-Jung
    Ha, Tae Kwon
    Jeong, Hyo Tae
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 144 - 148
  • [32] Effect of mean stress on fretting fatigue of Ti-6Al-4V on Ti-6Al-4V
    Lovrich, NR
    Neu, RW
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (01) : 41 - 55
  • [33] Elastic properties of the titanium alloy Ti-6Al-4V
    Trofimov, E. A.
    Lutfullin, R. Ya.
    Kashaev, R. M.
    LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2015, 5 (01): : 67 - 69
  • [34] Microstructure and properties of the oxynitrided Ti-6Al-4V alloy
    Moskalewicz, T.
    Zimowski, S.
    Kitano, Y.
    Wierzchon, T.
    Czyrska-Filemonowicz, A.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2006, 44 (03): : 133 - 138
  • [35] Effect of Multi-Pass Ultrasonic Surface Rolling on the Mechanical and Fatigue Properties of HIP Ti-6Al-4V Alloy
    Li, Gang
    Qu, Shengguan
    Xie, Mingxin
    Ren, Zhaojun
    Li, Xiaoqiang
    MATERIALS, 2017, 10 (02):
  • [36] Influence of annealing on the mechanical anisotropy of hot pack rolled Ti-6Al-4V sheets
    Kumar, S. S. Satheesh
    Raghu, T.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2011, 102 (12) : 1433 - 1437
  • [37] COLD ROLLING PROPERTIES OF TI-6AL-4V SHEET.
    NISHIMURA, T.
    HASEGAWA, A.
    1982, V 32 (N 1): : 44 - 47
  • [38] Microstructure and mechanical properties of sheath and ply-rolling technology for TC4 sheets
    Wang, HW
    Ren, LB
    Hu, QX
    Wang, J
    Chen, D
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 171 - 173
  • [39] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
    Ferdinandov, Nikolay Vasilev
    Gospodinov, Danail Dimitrov
    Ilieva, Mariana Dimitrova
    Radev, Rossen Hristov
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
  • [40] Effect of high vacuum environment on tensile fatigue properties of Ti-6Al-4V alloy
    Nakamura, Takashi
    Kaneko, Makoto
    Kazami, Shiroh
    Noguchi, Toru
    2000, Soc Mater Sci, Japan, Kyoto, Japan (49)
12345