Fatigue properties of pack ply-rolling Ti-6Al-4V alloy sheets

被引：0
|
作者：
Hong Quan [1 ]
Yang Guan-jun [1 ]
Zhao Yong-qing [1 ]
Qi Yun-lian [1 ]
Guo Ping [1 ]
机构：
[1] NW Inst Nonferrous Met Res, Xian 710016, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2007年 / 17卷
关键词：
Ti-6Al-4V alloy; pack ply-rolling; sheet; texture; fatigue properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of pack ply-rolling process and heat-treatment on the texture characteristics of Ti-6Al-4V alloy sheets was investigated applying the EBSD technique. The tensile properties and fatigue properties of the sheets possessing different type textures were measured. The results show that the alloy sheets possessing single type texture (B or T) exhibit lower fatigue strength compared with the mixed texture (B/T). The sheet possessing basal texture exhibits isotropy and its elastic modulus and yield strength are lower than those under other conditions.
引用
收藏
页码：S218 / S222
页数：5
相关论文
共 50 条
  • [1] Fatigue properties of pack ply-rolling Ti-6Al-4V alloy sheets
    洪权
    杨冠军
    赵永庆
    戚运莲
    郭萍
    TransactionsofNonferrousMetalsSocietyofChina, 2007, (S1) : 218 - 222
  • [2] Roll bonding behaviour of Ti-6Al-4V sheets during pack rolling
    Kumar, S. S. Satheesh
    Sathiyanarayanan, S.
    Rao, A. Sambasiva
    Raghu, T.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2009, 62 (02): : 129 - 133
  • [3] Roll bonding behaviour of Ti-6Al-4V sheets during pack rolling
    Kumar S.S.S.
    Sathiyanarayanan S.
    Rao A.S.
    Raghu T.
    Transactions of the Indian Institute of Metals, 2009, 62 (2) : 129 - 133
  • [4] DEVELOPMENT OF TI-6AL-4V SHEETS .1. HOT-ROLLING TEXTURE OF TI-6AL-4V SHEETS
    KOIKE, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S735 - S735
  • [5] THE EFFECT OF COLD-ROLLING ON THE FATIGUE PROPERTIES OF TI-6AL-4V
    LIU, SZ
    MINAKAWA, K
    SCHOLTES, B
    MCEVILY, AJ
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (01): : 144 - 145
  • [6] Origin of surface ridging in Ti-6Al-4V sheets produced by pack rolling and its effect on microstructural and mechanical properties
    Javadinejad, Hamid Reza
    Shin, Giseung
    Lee, Hyunseok
    Choi, Mi-Seon
    Park, Jaehoon
    Yoon, Jonghun
    Kim, Jeoung Han
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 297 (297)
  • [7] Effect of stress ratio on fatigue properties for Ti-6Al-4V alloy
    Takeuchi, Etsuo
    Furuya, Yoshiyuki
    Nagashima, Nobuo
    Matsuoka, Saburo
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2007, 93 (04): : 309 - 316
  • [8] Fatigue Properties of Ti-6Al-4V Alloy in Vacuum at Cryogenic Temperature
    Dong, S. L.
    Lu, G.
    Zhang, L. Q.
    Yang, D. Z.
    He, S. Y.
    Han, E. H.
    PROTECTION OF MATERIALS AND STRUCTURES FROM SPACE ENVIRONMENT, 2009, 1087 : 534 - +
  • [9] Fatigue properties of tungsten fiber reinforced Ti-6Al-4V alloy
    Son, SY
    Nishida, S
    Hattori, N
    Nakano, K
    FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2, 2000, 183-1 : 963 - 968
  • [10] Microstructure and mechanical properties of Ti-6Al-4V alloy sheets via room-temperature rolling and cryorolling
    Yu, Feilong
    Zhang, Yun
    Kong, Charlie
    Yu, Hailiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 834
12345