Design of a 5kW, 1U, 10kW/ltr. resonant DC-DC converter for telecom applications

被引：23
|
作者：
Biela, J. [1 ]
Badstuebner, U. [1 ]
Kolar, J. W. [1 ]
机构：
[1] ETH, Power Elect Syst Lab, ETH Zentrum, CH-8092 Zurich, Switzerland
来源：
INTELEC 07 - 29TH INTERNATIONAL TELECOMMUNICATIONS ENERGY CONFERENCE, VOLS 1 AND 2 | 2007年
关键词：
D O I：
10.1109/INTLEC.2007.4448897
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The demand for decreasing cost and volume and also for increasing efficiency leads to a constantly increasing power density of converter systems. For maximising the power density of a 5kW telecom supply an optimisation procedure that automatically balances the switching frequency, semiconductor and passive losses, and thermal performance has been developed. This procedure and the belonging analytical converter and transformer models are presented in this paper. Moreover, the resulting optimised design, which has a power density of 10kW/ltr. and an efficiency of 96% at a height of 1U, is presented.
引用
收藏
页码：824 / 831
页数：8
相关论文
共 50 条
  • [41] Design and Implementation of 1.5 kW Half Bridge Bidirectional DC-DC Converter based on Gallium Nitride devices
    Gurudiwan, Shubhangi
    Roy, Shamibrota Kishore
    Basu, Kaushik
    2019 NATIONAL POWER ELECTRONICS CONFERENCE (NPEC), 2019,
  • [42] Design and efficiency measurement of a sub-unit for a 20kW DC-DC multiphase power converter
    Pasquet, Bastien
    Vinnac, Sebastien
    Blaquiere, Jean-Marc
    Meynard, Thierry
    Sanchez, Sebastien
    2023 IEEE INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES & INTERNATIONAL TRANSPORTATION ELECTRIFICATION CONFERENCE, ESARS-ITEC, 2023,
  • [43] Configurations of Modular Push-Pull Buck DC-DC Converters for 12KW Telecom SMPS and Its Design
    Prakash, Saravana P.
    Kalpana, R.
    2016 BIENNIAL INTERNATIONAL CONFERENCE ON POWER AND ENERGY SYSTEMS: TOWARDS SUSTAINABLE ENERGY (PESTSE), 2016,
  • [44] Design of 500 kHz, 18 kW Low Leakage Inductance Intraleaved Litz Wire Transformer for Bi-directional Resonant DC-DC Converter
    Ngo, Minh
    Cao, Yuliang
    Dong, Dong
    Burgos, Rolando
    2021 THIRTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2021), 2021, : 1153 - 1161
  • [45] A 5-kW Isolated High Voltage Conversion Ratio Bidirectional CLTC Resonant DC-DC Converter With Wide Gain Range and High Efficiency
    Wang, Cheng-Shan
    Zhang, Shu-huai
    Wang, Yi-feng
    Chen, Bo
    Liu, Jiang-hua
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2019, 34 (01) : 340 - 355
  • [46] 1 MeV, 10 kW DC electron accelerator for industrial applications
    Nayak, B.
    Acharya, S.
    Bhattacharjee, D.
    Bakhtsingh, R. I.
    Rajan, R.
    Sharma, D. K.
    Dewangan, S.
    Sharma, V.
    Patel, R.
    Tiwari, R.
    Benarjee, S.
    Srivastava, S. K.
    JOURNAL OF INSTRUMENTATION, 2016, 11
  • [47] Drive Cycle Based Multi-Objective Optimization of 50 kW SiC Composite DC-DC Converter Design for Electrified Automotive Applications
    Fernandez, Manuel Cereijido
    Ghosh, Aritra
    Erickson, Robert W.
    2019 IEEE 7TH WORKSHOP ON WIDE BANDGAP POWER DEVICES AND APPLICATIONS (WIPDA 2019), 2019, : 164 - 170
  • [48] Design of an 11 kW power factor correction and 10 kW ZVS DC/DC converter for a high-efficiency battery charger in electric vehicles
    Bai, H.
    Taylor, A.
    Guo, W.
    Szatmari-Voicu, G.
    Wang, N.
    Patterson, J.
    Kane, J.
    IET POWER ELECTRONICS, 2012, 5 (09) : 1714 - 1722
  • [49] Optimal design of a low cost 20kW 99.1% efficiency active ZCS isolated dc-dc converter
    Delaforge, Timothe
    Mariethoz, Sebastien
    2018 INTERNATIONAL POWER ELECTRONICS CONFERENCE (IPEC-NIIGATA 2018 -ECCE ASIA), 2018, : 3820 - 3824
  • [50] Design, Implementation and Experimental Validation of a DC-DC Resonant Converter for PEM Fuel Cell Applications
    Outeiro, Maria Teresa
    Carvalho, Adriano
    39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 619 - 624
12345