Thermal analysis during solidification of cast Al-Si alloys

被引：37

作者：

Canales, A. A. ^{[2
]}

Talamantes-Silva, J. ^{[3
]}

Gloria, D. ^{[4
]}

Valtierra, S. ^{[4
]}

Colas, R. ^{[1
]}

机构：

[1] Univ Autonoma Nuevo Leon, Fac Ingn Mecan & Elect, San Nicolas De Los Garza 66451, NL, Mexico

[2] Cuprum SA CV, San Nicolas De Los Garza 66480, NL, Mexico

[3] Nemak SA CV, Garcia 66000, NL, Mexico

[4] Owens Corning, Santa Catarina 66350, NL, Mexico

来源：

THERMOCHIMICA ACTA | 2010年 / 510卷 / 1-2期

关键词：

Aluminium; Casting; Solidification; Thermal analysis; HEAT-TRANSFER;

D O I：

10.1016/j.tca.2010.06.026

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Solidification of a series of aluminium alloys was studied by means of thermal analysis; the study was centred on the effect that silicon and iron exert on the temperatures for the onset of different microstructural characteristics. The alloys were prepared in a gas fired furnace and were poured into graphite moulds instrumented with a type K thermocouple. The cooling curve was registered with the aid of a computer-driven data logging system and was derived to determine the temperatures for the onset of the formation of pre-eutectic aluminium dendrites, and those for the Al-Si eutectic and for a complex Al-Si-Cu-Mg eutectic. It was found that silicon exerts a strong influence on the two former temperatures, whereas the third one is independent of the content of silicon or iron. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：82 / 87

页数：6

共 50 条

[41] A MICROSTRUCTURAL STUDY OF CAST AND HIPED AL-SI ALLOYS
CHAMA, C
HOWELL, PR
JOURNAL OF METALS, 1985, 37 (11): : A116 - A116
[42] MODIFICATION OF EUTECTIC MICROSTRUCTURES - AL-SI CAST ALLOYS
SMITH, RW
CIM BULLETIN, 1988, 81 (914): : 94 - 94
[43] Thermal analysis and microscopical characterization of Al-Si hypereutectic alloys
Robles Hernández, F.C.
Sokolowski, J.H.
Journal of Alloys and Compounds, 2006, 419 (1-2): : 180 - 190
[44] Thermal analysis and microscopical characterization of Al-Si hypereutectic alloys
Hernandez, F. C. Robles
Sokolowski, J. H.
JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 419 (1-2) : 180 - 190
[45] Eutectic solidification in hypoeutectic Al-Si alloys: electron backscatter diffraction analysis
Nogita, K
Dahle, AK
MATERIALS CHARACTERIZATION, 2001, 46 (04) : 305 - 310
[46] Differential scanning calorimetry analysis of solidification and precipitation behavior in Al-Si alloys
Iwasaki Y.
Keikinzoku/Journal of Japan Institute of Light Metals, 2024, 74 (04): : 173 - 179
[47] Influence of cooling rate on the size of the precipitates and thermal characteristic of Al-Si cast alloys
Maniara, R.
Dobrzanski, L. A.
Sokolowski, J. H.
Kasprzak, W.
Kierkus, W. T.
THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 59 - 64
[48] Effect of thermal degradation on mechanical properties of cast Al-Si alloys for cylinder heads
Ren, Peirong
Zhao, Chengzhang
Zuo, Zhengxing
Shui, Youfu
Li, Dongwei
Huang, Weiqing
ENGINEERING FRACTURE MECHANICS, 2023, 283
[49] Simulation for microstructure evolution of Al-Si alloys in solidification process
徐宏
侯华
张国伟
Transactions of Nonferrous Metals Society of China, 2006, (S2) : 591 - 597
[50] In Situ Study of Microstructure Evolution in Solidification of Hypereutectic Al-Si Alloys with Application of Thermal Analysis and Neutron Diffraction
Sediako, Dimitry G.
Kasprzak, Wojciech
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (09): : 4160 - 4173

← 1 2 3 4 5 →