The structure of nanocrystalline stainless steel powders obtained by ball milling and duplex stainless steel formed by their sintering

被引：0
|
作者：
Szymanska, A [1 ]
Sikorski, K
Kazior, J
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Warsaw, Poland
[2] Cracow Univ Technol, Inst Met Sci & Met Technol, Krakow, Poland
来源：
BULK AND GRADED NANOMETALS | 2005年 / 101-102卷
关键词：
nanocrystalline duplex stainless steel; ball milling; microstructures; AlSl 316L steel powders; AISI 434L steel powders;
D O I：
10.4028/www.scientific.net/SSP.101-102.135
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article illustrates the influence of ball milling of the 316L and 434L stainless steel powders as well as their mixture (50 wt. % of 434L + 50 wt. % of 316L) on their structure. Medium size of the grains (about 30 nm) was obtained after 110 hours of milling. The powders that obtained were pressed isostatically and sintered by impulse plasma method in vacuum. The samples were then characterized using an optical microscope equipped with a computer image analyzer, scanning electron microscope and X-ray diffractometer.
引用
收藏
页码：135 / 138
页数：4
相关论文
共 50 条
  • [41] Effect of Sintering Temperature on the Pitting Corrosion of Ball Milled Duplex Stainless Steel by using Linear Sweep Voltammetry
    Rajendrachari, Shashanka
    ANALYTICAL & BIOANALYTICAL ELECTROCHEMISTRY, 2018, 10 (03): : 349 - 361
  • [42] STRUCTURE AND PROPERTIES OF SPRAY FORMED STAINLESS-STEEL
    UCOK, I
    ANDO, T
    GRANT, NJ
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1991, 27 (03): : 237 - 247
  • [43] Electrolytic pickling of duplex stainless steel
    Ipek, N
    Holm, B
    Pettersson, R
    Runnsjö, G
    Karlsson, M
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2005, 56 (08): : 521 - 532
  • [44] Superplastic forming of duplex stainless steel
    Lee, Ho-Sung
    Yoon, Jong-Hoon
    Yoo, Joon-Tae
    7th European Stainless Steel Conference: Science and Market, Proceedings, 2011,
  • [45] Superplastic forming of duplex stainless steel
    Patankar, SN
    Lim, CT
    Tan, MJ
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (09): : 2394 - 2396
  • [46] WELDING DUPLEX STAINLESS-STEEL
    HILKES, J
    BEKKERS, K
    WELDING JOURNAL, 1995, 74 (11) : 51 - 54
  • [47] Superplastic deformation of a duplex stainless steel
    Pulino-Sagradi, D
    Medrano, RE
    Nazar, AMM
    SUPERPLASTICITY IN ADVANCED MATERIALS, ICSAM-2000, 2001, 357-3 : 199 - 204
  • [48] Magnetic characterisation of duplex stainless steel
    Mészáros, I
    PHYSICA B-CONDENSED MATTER, 2006, 372 (1-2) : 181 - 184
  • [49] Hydrogen transport in a duplex stainless steel
    Owczarek, E
    Zakroczymski, T
    ACTA MATERIALIA, 2000, 48 (12) : 3059 - 3070
  • [50] Superplastic forming of duplex stainless steel
    S. N. Patankar
    C. T. Lim
    M. J. Tan
    Metallurgical and Materials Transactions A, 2000, 31 : 2394 - 2396
12345