Prediction of quality changes during osmo-convective drying of blueberries using neural network models for process optimization

被引:59
|
作者
Chen, CR [1 ]
Ramaswamy, HS [1 ]
Alli, I [1 ]
机构
[1] McGill Univ, Dept Food Sci, St Anne De Bellevue, PQ H9X 3V9, Canada
关键词
ANN; color; texture; rehydration ratio; kinetics; dehydration; modeling;
D O I
10.1081/DRT-100103931
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Artificial neural network (ANN) models were used for predicting quality changes during osmo-convective drying of blueberries for process optimization. Osmotic drying usually involves treatment of fruits in an osmotic solution of predetermined concentration, temperature and time, and generally affects several associated quality factors such as color, texture, rehydration ratio as well as the finish drying time in a subsequent drier (usually air drying). multi-layer neural network models with 3 inputs (concentration, osmotic temperature and contact time) were developed to predict 5 outputs: air drying time, color, texture, and rehydration ratio as well as a defined comprehensive index. The optimal configuration of neural network model was obtained by varying the main parameters of ANN: transfer function, learning rule, number of neurons and layers, and learning runs. The predictability of ANN models was compared with that of multiple regression models, confirming that ANN models had much better performance than conventional mathematical models. The prediction matrices and corresponding response curves for main processing properties under various osmotic dehydration conditions were used for searching the optimal processing conditions. The results indicated that it is feasible to use ANN for prediction and optimization of osmo-convective drying for blueberries.
引用
收藏
页码:507 / 523
页数:17
相关论文
共 50 条
  • [41] Prediction of the changes on the CIELab values of fabric after chemical finishing using artificial neural network and linear regression models
    Balci, Onur
    Ogulata, R. Tugrul
    FIBERS AND POLYMERS, 2009, 10 (03) : 384 - 393
  • [42] The prediction of precipitation changes in the Aji-Chay watershed using CMIP6 models and the wavelet neural network
    Khoramabadi, Farahnaz
    Moradinia, Sina Fard
    JOURNAL OF WATER AND CLIMATE CHANGE, 2024, 15 (05) : 2141 - 2161
  • [43] Prediction of the changes on the CIELab values of fabric after chemical finishing using artificial neural network and linear regression models
    Onur Balcı
    R. Tuğrul Oğulata
    Fibers and Polymers, 2009, 10 : 384 - 393
  • [44] Optimization of process conditions for moisture ratio and effective moisture diffusivity of tomato during convective hot-air drying using response surface methodology
    Obajemihi, Obafemi Ibitayo
    Olaoye, Joshua Olanrewaju
    Cheng, Jun-Hu
    Ojediran, John Olusegun
    Sun, Da-Wen
    JOURNAL OF FOOD PROCESSING AND PRESERVATION, 2021, 45 (04)
  • [45] Optimization of process conditions for moisture ratio and effective moisture diffusivity of tomato during convective hot-air drying using response surface methodology
    Obajemihi, Obafemi Ibitayo
    Olaoye, Joshua Olanrewaju
    Cheng, Jun-Hu
    Ojediran, John Olusegun
    Sun, Da-Wen
    Journal of Food Processing and Preservation, 2021, 45 (04):
  • [46] Hydropower Optimization Using Artificial Neural Network Surrogate Models of a High-Fidelity Hydrodynamics and Water Quality Model
    Shaw, Amelia R.
    Sawyer, Heather Smith
    LeBoeuf, Eugene J.
    McDonald, Mark P.
    Hadjerioua, Boualem
    WATER RESOURCES RESEARCH, 2017, 53 (11) : 9444 - 9461
  • [47] Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network
    Soomro, Imtiaz Ali
    Pedapati, Srinivasa Rao
    Awang, Mokhtar
    Soomro, Afzal Ahmed
    Alam, Mohammad Azad
    Bhayo, Bilawal Ahmed
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2022, 19 (04) : 1 - 10
  • [48] Building energy consumption prediction using multilayer perceptron neural network-assisted models; comparison of different optimization algorithms
    Afzal, Sadegh
    Ziapour, Behrooz M.
    Shokri, Afshar
    Shakibi, Hamid
    Sobhani, Behnam
    ENERGY, 2023, 282
  • [49] Optimization of Process Parameters That Affects hole Quality Characteristics in Drilling Of Syntactic Foams Using Artificial Neural Network Model And Particle Swarm Optimization
    Lakkundi, Anand
    Gaitonde, Vinayak N.
    Karnik, S. R.
    Deshpande, Anand S.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018), 2019, 577
  • [50] Prediction of Flying Height Using Deep Neural Network Based on Particle Swarm Optimization in Hard Disk Drive Manufacturing Process
    Kanjanapruthipong, Worawit
    Prasitmeeboon, Pitcha
    Konghuayrob, Poom
    SENSORS AND MATERIALS, 2024, 36 (04) : 1377 - 1387