A Comparative Study on the Wind Deflection of Railway Overhead Contact Line Based on Empirical Formula and Finite Element Approach

被引:1
|
作者
Chu, Wenping [1 ]
Song, Yang [2 ]
Liu, Zhigang [1 ]
机构
[1] Southwest Jiaotong Univ, Natl Rail Transit Electrificat & Automat Engn Tec, Chengdu 610031, Peoples R China
[2] Norwegian Univ Sci & Technol, Dept Struct Engn, N-7491 Trondheim, Norway
基金
中国国家自然科学基金;
关键词
SENSITIVITY-ANALYSIS; CATENARY SYSTEM; PANTOGRAPH; OPTIMIZATION; FORCES; WEAR;
D O I
10.1155/2021/5737457
中图分类号
O42 [声学];
学科分类号
070206 ; 082403 ;
摘要
The assessment of wind deflection of the railway overhead contact line (OCL) is of great importance to ensure the safe and reliable operation of the electrified railway. This paper performs a comparative study of the railway OCL wind deflection based on the traditional empirical formula and finite element method (FEM). Considering the geometrical nonlinearity, a nonlinear finite element approach is adopted to model the OCL. The crosswind load is applied to the OCL through an iterative procedure. The comparative study indicates that the maximum wind deflection estimated by the empirical formula is generally the same as the FEM result when the turbulence intensity is 10%. However, with more than 10% of the turbulence intensity, the empirical formula may give a risky result. Then, some coefficients are introduced to modify the empirical formula according to the FEM results. The numerical examples are presented with different OCL tension classes to verify the validation of the modified empirical formula.
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Comparative study of finite element based response evaluation methods for laminated plates
    J. W. Park
    K. C. Lee
    Y. H. Kim
    Computational Mechanics, 2003, 32 : 115 - 133
  • [32] Numerical study of lateral wind effect on parachute dropping based on finite element method
    Cheng, H.
    Wei, L.
    Zhou, B.
    He, Q.
    Xiao, P.
    MECHANIKA, 2017, 23 (01): : 126 - 131
  • [33] Based on the Finite Element Method for Gear and Rack Research on Contact Fatigue Strength of Study
    Li, YongXiang
    Yang, Lei
    Wang, MingXu
    Wang, Zhen
    ADVANCED MATERIALS DESIGN AND MECHANICS, 2012, 569 : 339 - 342
  • [34] Finite element based parametric study of elastic-plastic contact of fractal surfaces
    Chatterjee, Biplab
    Sahoo, Prasanta
    INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 : 552 - 561
  • [35] Fault location in overhead transmission line: A novel non-contact measurement approach for traveling wave-based scheme
    Anane, Paul Oswald Kwasi
    Huang, Qi
    Bamisile, Olusola
    Ayimbire, Patrick Nyaaba
    INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, 2021, 133
  • [36] Operator based finite element modelling of viscoelastic cracked propeller shaft: a comparative study
    Ganguly, Krishanu
    Ranjeet, Rahul
    Roy, Haraprasad
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2020, 45 (01):
  • [37] DESIGN OF PATIENT SPECIFIC HIP PROSTHESIS BASED ON FINITE ELEMENT ANALYSIS: A COMPARATIVE STUDY
    Snekhalatha, U.
    Dhason, Raja
    Rajalakshmi, T.
    BIOMEDICAL ENGINEERING-APPLICATIONS BASIS COMMUNICATIONS, 2023, 35 (04):
  • [38] Tooth profile modification of helical gears and experimental study based on finite element contact analysis
    Wu, Yong-Jun
    Wang, Jian-Jun
    Han, Qin-Kai
    Li, Qi-Han
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2011, 26 (02): : 409 - 415
  • [39] Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis
    Abbadeni, Mohammed
    Zidane, Ibrahim
    Zahloul, Hamou
    Madaoui, Zakaria
    FRATTURA ED INTEGRITA STRUTTURALE, 2019, 13 (49): : 282 - 290
  • [40] Operator based finite element modelling of viscoelastic cracked propeller shaft: a comparative study
    Krishanu Ganguly
    Rahul Ranjeet
    Haraprasad Roy
    Sādhanā, 2020, 45