Magnetic abrasive finishing of AZ91 magnesium alloy using electromagnet

被引：19

作者：

Chaurasia, Ankur ^{[1
]}

Rattan, Nav ^{[2
]}

Mulik, Rahul S. ^{[2
]}

机构：

[1] PDPU, Dept Mech Engn, Gandhinagar 382007, Gujrat, India

[2] IIT Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | 2018年 / 40卷 / 10期

关键词：

Magnetic abrasive finishing (MAF); Magnesium wheel (MAG wheel); Analysis of variance; Flexible magnetic abrasive brush (FMAB);

D O I：

10.1007/s40430-018-1399-7

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The magnesium alloy is widely used in the industry owing to its lightweight and high specific strength applications. In the present work, the effect of different process parameters of magnetic abrasive finishing process (MAF) on surface roughness (Ra) has been studied along with the various forces acting on AZ91 magnesium alloy plate during finishing operation. The average surface roughness Ra' of AZ91 magnesium alloy was examined, and various cutting forces were also measured during finishing with MAF process. Permanent magnet was used on the opposite side of the workpiece and electromagnet in order to improve the strength of magnetic field in this process. In the present study, effects of various process parameters such as working gap, rotational speed and supplied current have been studied on the percentagechange in Ra' and various cutting forces during finishing of AZ91 magnesium alloy. Improvement in surface texture and finishing mechanism during MAF process was also observed with the help of SEM and AFM images.

引用

页数：10

共 50 条

[31] Mechanical spectroscopy of commercial AZ91 magnesium alloy
Lambri, OA
Riehemann, W
Trojanová, Z
SCRIPTA MATERIALIA, 2001, 45 (12) : 1365 - 1371
[32] Influence of cerium on corrosion of AZ91 magnesium alloy
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
不详
J Rare Earth, 2006, SUPPL. 3 (222-227):
[33] Purification technology of AZ91 magnesium alloy wastes
Wu, GH
Xie, M
Zhai, CQ
Zeng, XQ
Zhu, YP
Ding, WJ
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 (06) : 1260 - 1264
[34] Thermomechanical Processing and Superplasticity of AZ91 Magnesium Alloy
J.J.Blandin
M.Suéry
Journal of Materials Science & Technology, 2004, (03) : 295 - 297
[35] Lost foam casting of AZ91 magnesium alloy
Bélanger, JF
Corbeil, JF
Tremblay, R
Dubé, D
LIGHT METALS 2000 METAUX LEGERS, PROCEEDINGS, 2000, : 471 - 479
[36] Thermal Fatigue of Magnesium Base Alloy AZ91
Krauss, Martin
Scholtes, Berthold
MATERIALS TESTING, 2009, 51 (05) : 295 - 298
[37] Hot workability of nanocrystalline AZ91 magnesium alloy
Jabbari-Taleghani, M. A.
Torralba, J. M.
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 595 : 1 - 7
[38] Effect of Mischmetal on the Microstructure of the Magnesium Alloy AZ91
Mikusek, D.
Rapiejko, C.
Walisiak, D.
Pacyniak, T.
ARCHIVES OF FOUNDRY ENGINEERING, 2019, 19 (04) : 45 - 50
[39] Facing machinability of AZ91 magnesium alloy castings
Narita, Hidekazu
Katoh, Kazuyoshi
Tokisue, Hiroshi
Keikinzoku/Journal of Japan Institute of Light Metals, 2001, 51 (11): : 614 - 618
[40] Damping behaviour of AZ91 magnesium alloy with cracks
Göken, J
Riehemann, W
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 370 (1-2): : 417 - 421

← 1 2 3 4 5 →