Analysis of the polymeric abrasive paste regeneration for abrasive flow machining

被引：0

作者：

Nowacka, Agnieszka ^{[1
]}

Klepka, Tomasz ^{[1
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Dept Technol & Polymer Proc, 36 Nadbystrzycka Str, PL-20618 Lublin, Poland

来源：

POLIMERY | 2021年 / 66卷 / 7-8期

关键词：

polymeric abrasive paste; abrasive flow machining; efficiency of sifting; processing of polymer surfaces; CHANNELS;

D O I：

10.14314/polimery.2021.7.6

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The influence of conditions and the sifting process efficiency of the worn-out polymeric abrasive paste containing silica (SiO2) and polymer chips remaining after the surface treatment were investigated. The abrasive paste regeneration process consisted of sifting the used paste through sieves of a vibrating screen, on which abrasive grains and polymer chips were recovered. The diameter of the sieve holes determined the size of the recovered abrasive grains and polymer chips, on the size of which the efficiency of the process depended. The lowest efficiency of the sifting process was obtained using a sieve with the holes diameter equal to the diameter of the grain and the polymer chips of the given fraction. The highest efficiency of the sifting process was obtained for a sieve with a diameter of 0.032 mm. The regenerated polymeric abrasive paste can be reused in the process of abrasive flow machining.

引用

页码：426 / 431

页数：6

共 50 条

[21] Force behaviour in abrasive flow machining
Mahdy, MAM
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2002, 17 (07): : 618 - 642
[22] Fatigue performance in Abrasive Flow Machining
Cherian, Jose
Issac, Jeoju M.
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 354 - +
[23] A Review on Abrasive Flow Machining (AFM)
Kumar, Santhosh S.
Hiremath, Somashekhar S.
1ST GLOBAL COLLOQUIUM ON RECENT ADVANCEMENTS AND EFFECTUAL RESEARCHES IN ENGINEERING, SCIENCE AND TECHNOLOGY - RAEREST 2016, 2016, 25 : 1297 - 1304
[24] Preferential Media for Abrasive Flow Machining
Kar, Kamal K.
Ravikumar, N. L.
Tailor, Piyushkumar B.
Ramkumar, J.
Sathiyamoorthy, D.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2009, 131 (01): : 0110091 - 01100911
[25] A review of abrasive flow machining research
Yang, L. F.
Zhang, X. R.
Liu, W. N.
INFORMATION TECHNOLOGY AND COMPUTER APPLICATION ENGINEERING, 2014, : 181 - 184
[26] Structured surface softness abrasive flow precision finish machining and its abrasive flow dynamic numerical analysis
Ji S.
Tang B.
Tan D.
Gong B.
Yuan Q.
Pan Y.
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (15): : 178 - 184
[27] Hardness Effects on Abrasive Flow Machining
Gov, Kursad
Eyercioglu, Omer
Cakir, Mehmed Veysel
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2013, 59 (10): : 626 - 631
[28] Fundamentals and technology of abrasive flow machining
Uhlmann, E
Szulczynski, H
MICROENGINEERING 99, PROCEEDINGS, 1999, : 274 - 274
[29] Study the rheological properties of abrasive gel with various passageways in abrasive flow machining
Cheng, K. C.
Chen, Kuan-Yu
Wang, A. C.
Lin, Y. C.
ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 447 - +
[30] ABRASIVE MACHINING
不详
MACHINE TOOL REVIEW, 1974, 62 (362): : 145 - 147

← 1 2 3 4 5 →