Analysis of the polymeric abrasive paste regeneration for abrasive flow machining

被引：0

作者：

Nowacka, Agnieszka ^{[1
]}

Klepka, Tomasz ^{[1
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Dept Technol & Polymer Proc, 36 Nadbystrzycka Str, PL-20618 Lublin, Poland

来源：

POLIMERY | 2021年 / 66卷 / 7-8期

关键词：

polymeric abrasive paste; abrasive flow machining; efficiency of sifting; processing of polymer surfaces; CHANNELS;

D O I：

10.14314/polimery.2021.7.6

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The influence of conditions and the sifting process efficiency of the worn-out polymeric abrasive paste containing silica (SiO2) and polymer chips remaining after the surface treatment were investigated. The abrasive paste regeneration process consisted of sifting the used paste through sieves of a vibrating screen, on which abrasive grains and polymer chips were recovered. The diameter of the sieve holes determined the size of the recovered abrasive grains and polymer chips, on the size of which the efficiency of the process depended. The lowest efficiency of the sifting process was obtained using a sieve with the holes diameter equal to the diameter of the grain and the polymer chips of the given fraction. The highest efficiency of the sifting process was obtained for a sieve with a diameter of 0.032 mm. The regenerated polymeric abrasive paste can be reused in the process of abrasive flow machining.

引用

页码：426 / 431

页数：6

共 50 条

[1] Analysis of the polymeric abrasive paste regeneration for abrasive flow machining
Nowacka, Agnieszka
Klepka, Tomasz
Polimery/Polymers, 2021, 66 (7-8): : 426 - 431
[2] Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil
Munhoz, Marcelo Rodrigo
Dias, Larissa Galante
Breganon, Ricardo
Fonteque Ribeiro, Fernando Sabino
de Souza Goncalves, Janaina Fracaro
Hashimoto, Elizabeth Mie
da Silva Junior, Carlos Elias
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (11-12): : 5061 - 5070
[3] Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil
Marcelo Rodrigo Munhoz
Larissa Galante Dias
Ricardo Breganon
Fernando Sabino Fonteque Ribeiro
Janaina Fracaro de Souza Gonçalves
Elizabeth Mie Hashimoto
Carlos Elias da Silva Júnior
The International Journal of Advanced Manufacturing Technology, 2020, 106 : 5061 - 5070
[4] ABRASIVE FLOW MACHINING
RHOADES, LJ
MANUFACTURING ENGINEERING, 1988, 101 (05): : 75 - 78
[5] STOCHASTIC MODELING AND ANALYSIS OF ABRASIVE FLOW MACHINING
WILLIAMS, RE
RAJURKAR, KP
JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1992, 114 (01): : 74 - 81
[6] Advantages of abrasive flow machining
Matechen, John
Abrasives, 1995, : 20 - 21
[7] Soft Abrasive Flow Machining
Ma, Baoli
Ji, Shiming
Tan, Dapeng
ADVANCED MANUFACTURING TECHNOLOGY AND SYSTEMS, 2012, 159 : 262 - +
[8] Study on the characteristics of new abrasive medium for abrasive flow machining
Gao, H.
Fu, Y. Z.
Zhu, J. H.
Wu, M. Y.
Sun, Y. W.
ADVANCES IN ABRASIVE TECHNOLOGY XVI, 2013, 797 : 417 - 422
[9] Recent advancements in abrasive flow machining and abrasive materials: A review
Goyal, Aneesh
Singh, Harvinder
Goyal, Rachin
Singh, Rajdeep
Singh, Swarn
MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 3065 - 3072
[10] Analysis of Flowing Characteristics of Abrasive Flow Machining in Slit
Dong, Zhiguo
Zhang, Xiaodong
Li, Yuanzong
MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 467-469 : 283 - 286

← 1 2 3 4 5 →