Single-tone and Polyharmonic Eddy Current Metal Detection and Non-Destructive Testing Education Software

被引：2
|
作者：
Svatos, J. [1 ]
机构：
[1] Czech Tech Univ, Fac Elect Engn, Tech 2, Prague 16627 6, Czech Republic
来源：
2016 JOINT IMEKO TC1-TC7-TC13 SYMPOSIUM: METROLOGY ACROSS THE SCIENCES: WISHFUL THINKING? | 2016年 / 772卷
关键词：
D O I：
10.1088/1742-6596/772/1/012052
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
This paper describes the design of a measuring chain for polyharmonic metal detectors used for education in laboratory exercises at Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Measurement. The Measuring chain is composed of DDS signal generator, Digitiser and PC with software programmed in Labview. Eddy current principles or more specifically eddy current metal detectors are an important part of non-destructive testing, instrumentations and measurement. A short introduction to the background and principles of eddy current metal detectors are presented. Next part of the article deals with a brief description of the most common methods, as well as, non-traditional polyharmonic methods for eddy current metal detection. The following part contains an implementation of the proposed algorithms in LabVIEW graphical programming language. Finally, the created program for education of eddy current metal detectors and results obtained on the metal detector ATMID are discussed.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Evaluation of System Parameters for Eddy-Current Non-Destructive Testing
    Astakhov, V.
    Danilina, E.
    2017 2ND INTERNATIONAL URAL CONFERENCE ON MEASUREMENTS (URALCON), 2017, : 336 - 340
  • [22] PULSED EXCITATION IN EDDY CURRENT NON-DESTRUCTIVE TESTING OF CONDUCTIVE MATERIALS
    Smetana, M.
    Strapacova, T.
    Janousek, L.
    ADVANCES IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2008, 7 (1-2) : 326 - 329
  • [23] A REVIEW ON EDDY CURRENT THERMOGRAPHY TECHNIQUE FOR NON-DESTRUCTIVE TESTING APPLICATION
    Rusli, N. S.
    Abidin, I. Z.
    Aziz, S. A.
    JURNAL TEKNOLOGI, 2016, 78 (11): : 127 - 132
  • [24] Application of magnetoresistive sensors for eddy current non-destructive testing of materials
    Sikora, R
    Gratkowski, S
    Komorowski, M
    Pacuk, J
    Enokizono, M
    Chady, T
    Kliem, H
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 20A AND 20B, 2001, 557 : 977 - 984
  • [25] INTEGRAL-FEM EDDY CURRENT SOLVER FOR NON-DESTRUCTIVE TESTING
    Preda, Gabriel
    Hantila, Florea Ioan
    REVUE ROUMAINE DES SCIENCES TECHNIQUES-SERIE ELECTROTECHNIQUE ET ENERGETIQUE, 2008, 53 (03): : 279 - 284
  • [26] Non-destructive testing of nanomaterials by using subminiature eddy current transducers
    Dmitriev, S. F.
    Ishkov, A. V.
    Katasonov, A. O.
    Malikov, V. N.
    Sagalakov, A. M.
    Shevtsova, L. I.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2016, 2017, 177
  • [27] An FPGA Implementation of the Goertzel Algorithm in a Non-Destructive Eddy Current Testing
    Kekelj, Matija
    Bulic, Neven
    Sucic, Victor
    2017 INTERNATIONAL CONFERENCE ON SIGNALS AND SYSTEMS (ICSIGSYS), 2017, : 180 - 184
  • [28] The Use of Fractional Order Derivatives for Eddy Current Non-Destructive Testing
    Sikora, Ryszard
    Grzywacz, Bogdan
    Chady, Tomasz
    44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 37, 2018, 1949
  • [29] New non-destructive testing approach based on eddy current for crack orientation detection and parameter estimation
    Guesmi, Mohamed
    Harzallah, Salaheddine
    Kouzou, Abdellah
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2021, 67 (04) : 431 - 451
  • [30] Metrological characterization of an eddy-current-based system for non-destructive testing
    Bernieri, A
    Betta, G
    IMTC/2000: PROCEEDINGS OF THE 17TH IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE: SMART CONNECTIVITY: INTEGRATING MEASUREMENT AND CONTROL, 2000, : 1608 - 1611
12345