Simple implementation of plain woven polypropylene fabric

被引:3
|
作者
Venter, Martin P. [1 ]
Venter, Gerhard [1 ]
机构
[1] Stellenbosch Univ, Dept Mech & Mechatron Engn, Stellenbosch, South Africa
关键词
Strength; materials; industrial textiles; protective fabrics; performance; TENSILE BEHAVIOR; INVERSE METHOD; CONSTITUTIVE PARAMETERS; TEXTILE COMPOSITES; BIAXIAL TENSION; MODEL; SIMULATIONS;
D O I
10.1177/1528083716665627
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
With increased utilisation of simple fabrics in technical engineering and manufacturing environments the need for suitable, easy to implement material representations in simulation software has increased. A simple implementation of plain woven polypropylene fabric for inflation simulation of dunnage bags is developed. Only standard finite element software packages and a simple material calibration protocol based on numerical optimisation were used to generate a homogenised material representation for the in-plane properties of plain woven polypropylene undergoing both loading and unloading. This is achieved by performing a simple material test that represents the in situ loading state of the material, measuring the applied load and material deformation in response to that load, and mapping that response to a simulation of the same test by means of an inverse problem statement. Following the proposed method, a material response model for plain wove polypropylene was developed that captures the major responses of a measured woven test specimen.
引用
收藏
页码:1097 / 1120
页数:24
相关论文
共 50 条
  • [21] FRICTIONAL-PROPERTIES OF PLAIN WOVEN GLASS FABRIC LAMINATES PTFE
    SAKAGUCHI, K
    IWAMOTO, K
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1983, 28 (12): : 915 - 921
  • [22] Computer simulation of plain woven fabric appearance from yarn photographs
    Ozdemir, H.
    Baser, G.
    JOURNAL OF THE TEXTILE INSTITUTE, 2009, 100 (03) : 282 - 292
  • [23] A new approach for numerical identification of bending behavior of plain woven fabric
    A. R. Moghassem
    Fibers and Polymers, 2012, 13 : 237 - 243
  • [24] Geometrical parameters of yarn cross-section in plain woven fabric
    Afrashteh, Siavash
    Merati, Ali Akbar
    Jeddi, Ali Asghar Asgharian
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2013, 38 (02) : 126 - 131
  • [25] Flexural and impact response of woven glass fiber fabric/polypropylene composites
    Russo, P.
    Acierno, D.
    Simeoli, G.
    Iannace, S.
    Sorrentino, L.
    COMPOSITES PART B-ENGINEERING, 2013, 54 : 415 - 421
  • [26] PREPERATION AND MECHANICAL PROPERTIES OF WOVEN FABRIC REINFORCED ALL POLYPROPYLENE COMPOSITES
    Abdorazaghi, Mohammad
    Shaikhzadeh Najar, Saeed
    Arefazar, Ahmad
    TEKSTIL VE KONFEKSIYON, 2012, 22 (04): : 284 - 292
  • [27] Experimental and Numerical Study of the Mechanical Behavior of a Commercial Polypropylene Woven Fabric
    Agaliotis, E.
    Bernal, C.
    Herrera-Franco, P. J.
    Flores-Johnson, E. A.
    NON-CONVENTIONAL MATERIALS AND TECHNOLOGIES: NOCMAT FOR THE XXI CENTURY, 2018, 7 : 799 - 803
  • [28] Mechanical Properties of Woven Fabric Reinforced All-Polypropylene Composites
    Seyhoglu, Hatice
    Dike, Ali Sinan
    Unlu, Saban Murat
    Celik, Atila
    Dogan, Mehmet
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2014, 53 (04) : 365 - 370
  • [29] A predictive model for the fabric-to-yarn bending stiffness ratio of a plain-woven set fabric
    Lomov, SV
    Truevtzev, AV
    Cassidy, C
    TEXTILE RESEARCH JOURNAL, 2000, 70 (12) : 1088 - 1096
  • [30] A simple discrete method for the simulation of the preforming of woven fabric reinforcement
    Walid, Najjar
    Xavier, Legrand
    Cedric, Pupin
    Philippe, Dalsanto
    Serge, Boude
    MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 213 - +