TIG Welding of Sintered AISI 316 L Stainless Steel

被引：2

作者：

Martins das Neves, Mauricio David ^{[1
]}

Barbosa, Luzinete Pereira ^{[1
]}

Elias da Silva, Luis Carlos ^{[1
]}

Correa, Olandir Vercino ^{[1
]}

Costa, Isolda ^{[1
]}

机构：

[1] IPEN CNEN SP, CCTM, BR-05508000 Sao Paulo, Brazil

来源：

ADVANCED POWDER TECHNOLOGY VII | 2010年 / 660-661卷

关键词：

Welding; stainless steel sintered; AISI; 316; L;

D O I：

10.4028/www.scientific.net/MSF.660-661.454

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Stainless steel (SS) powders are used in the preparation of sintered SS products. One of the applications of sintered SS products is as filters in the petrochemical and food processing industries. In these industries, the SS filters are subject to severe conditions associated with the removal of solid particles from the fluid. Hence, SS filters should have adequate mechanical strength and high corrosion resistance. Welding can be used to manufacture SS filters. In this study, sintered AISI 316L specimens were welded using the TIG (Tungsten Inert Gas) process. The weld joints were examined by optical microscopy and by scanning electron microscopy. Electrochemical polarization measurements were carried out to evaluate the influence of welding on the corrosion resistance of sintered filters.

引用

页码：454 / 459

页数：6

共 50 条

[31] Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method
Okwudili Simeon Ogbonna
Stephen Akinlabi Akinlabi
Nkosinathi Madushele
Olawale Samuel Fatoba
Esther Titilayo Akinlabi
The International Journal of Advanced Manufacturing Technology, 2023, 126 : 749 - 758
[32] Tribological performance of weld joints fabricated using TIG welding on AISI304L stainless steel
Dinakar, N.
Elansezhian, R.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2025,
[33] LASER DIRECT ENERGY DEPOSITION WELDING OF AISI 316 STAINLESS STEEL SHEETS
Ascari, Alessandro
Fortunato, Alessandro
Liverani, Erica
Lutey, Adrian H. A.
PROCEEDINGS OF THE ASME 14TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2019, VOL 2, 2019,
[34] Effect of rare earth elements on microstructure and oxidation behaviour in TIG weldments of AISI 316L stainless steel
Samanta, S. K.
Mitra, S. K.
Pal, T. K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 430 (1-2): : 242 - 247
[35] Influence of Purging Gas on 316L Stainless Steel Fusion Zone in Autogenous Stationary TIG Welding
Kojundzic, Domagoj
Krnic, Niksa
Samardzic, Ivan
Konjati, Pejo
TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2022, 29 (04): : 1080 - 1088
[36] Influence of Purging Gas on 316L Stainless Steel Fusion Zone in Autogenous Stationary TIG Welding
Kojundžić, Domagoj
Krnić, Nikša
Samardžić, Ivan
Konjatić, Pejo
Tehnicki Vjesnik, 2022, 29 (04): : 1080 - 1088
[37] A-TIG Welding of a Stainless Steel
Loureiro, A.
Rodrigues, A.
ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 370 - 374
[38] Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI 316L stainless steel plate
Lothongkum, G
Viyanit, E
Bhandhubanyong, P
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 110 (02) : 233 - 238
[39] Optimization of resistance spot welding process parameters and microstructural examination for dissimilar welding of AISI 316L austenitic stainless steel and 2205 duplex stainless steel
K. Vignesh
A. Elaya Perumal
P. Velmurugan
The International Journal of Advanced Manufacturing Technology, 2017, 93 : 455 - 465
[40] Optimization of resistance spot welding process parameters and microstructural examination for dissimilar welding of AISI 316L austenitic stainless steel and 2205 duplex stainless steel
Vignesh, K.
Perumal, A. Elaya
Velmurugan, P.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 455 - 465

← 1 2 3 4 5 →