Process characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3

被引：0
|
作者：
Wu, Anqi [1 ]
Liu, Qibin [2 ]
Qin, Shuijie [1 ]
机构：
[1] Guizhou Univ, Key Lab Photoelect Technol & Applicat, Guiyang 550025, Peoples R China
[2] Guizhou Univ, Coll Mat Met, Guiyang 550003, Peoples R China
来源：
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3 | 2011年 / 295-297卷
关键词：
Laser technique; 40Cr steel; Laser surface alloying; Rare earth oxide Y2O3; MICROSTRUCTURE; COATINGS;
D O I：
10.4028/www.scientific.net/AMR.295-297.520
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To increase the mechanical properties of the metal rollers, Mo and Mo+Y2O3 alloy powders were designed. And a kind of coating fabricated by a continuous wave CO2 laser surface alloying(LSA) on 40Cr steel roller was obtained. The effect of Mo and Mo+Y2O3 on microstructure, hardness and wearing resistance of alloying coating were studied by OM, SEM, XRD, microhardness tester and wearing tester. The experimental results indicate that the grain size in alloying coating is obviously fined, and the grain boundary is strengthened. The uniformity and density of microstructure are improved. The microhardness and wear resistance of alloying coating are significantly increased.
引用
收藏
页码：520 / +
页数：2
相关论文
共 50 条
  • [41] Experimental Verification of the Decomposition of Y2O3 in Fe-Based ODS Alloys During Mechanical Alloying Process
    Byun, Jong Min
    Park, Chun Woong
    Kim, Young Do
    METALS AND MATERIALS INTERNATIONAL, 2018, 24 (06) : 1309 - 1314
  • [42] Effects of Y2O3 addition and sintering temperature on mechanical properties of 9Cr-RAFM steel
    Huang, Yu-Zhu
    Xiong, Wei-Hao
    Lin, Shao-Jiang
    Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2012, 17 (01): : 95 - 101
  • [43] Characterization of the native Cr2O3 oxide surface of CrO2
    Cheng, RH
    Xu, B
    Borca, CN
    Sokolov, A
    Yang, CS
    Yuan, L
    Liou, SH
    Doudin, B
    Dowben, PA
    APPLIED PHYSICS LETTERS, 2001, 79 (19) : 3122 - 3124
  • [44] Preparation and characterization of Y3Al5O12:Ce and Y2O3:Eu phosphors powders by combustion process
    Fu, Yen-Pei
    Wen, Shaw-Bing
    Hsu, Chin-Shang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 458 (1-2) : 318 - 322
  • [45] Preparation and characterization of Y3Al5O12:Ce and Y2O3:Eu phosphors powders by combustion process
    Fu, Yen-Pei
    Wen, Shaw-Bing
    Hsu, Chin-Shang
    Journal of Alloys and Compounds, 2008, 458 (1-2): : 318 - 322
  • [46] Studies on alloying process of Ni-20Cr-20Fe-0.6Y2O3 powders during mechanical alloying
    Gaikwad, S. D.
    Dabhade, Vikram V.
    Murty, S. V. S. Narayana
    Manwatkar, Sushant
    POWDER TECHNOLOGY, 2024, 433
  • [47] Using a Hybrid Neural Network to Predict the Surface Morphology of Laser Surface Textured Ni-coated MoS2 40Cr Alloy Steel
    Sun, J. W.
    Yi, P.
    Jia, H. Y.
    Yang, X-S
    Zhan, Y-P
    Gao, K.
    LASERS IN ENGINEERING, 2023, 56 (4-6) : 225 - 244
  • [48] Synthesis and characterization of 9Cr ODS F/M steel with optimized Y2O3 and Ti content and its comparison with P91 steel
    Parida, Pradyumna Kumar
    Dasgupta, Arup
    Bajpai, Shubhra
    Sakthivel, T.
    Mythili, R.
    POWDER TECHNOLOGY, 2023, 425
  • [49] Growth and characterization of Y2O3:Eu3+ phosphor films by sol-gel process
    Rao, RP
    SOLID STATE COMMUNICATIONS, 1996, 99 (06) : 439 - 443
  • [50] Characterization of ZrO2/Y2O3 laser ablation plasma in vacuum, oxygen, and argon environments
    Voevodin, AA
    Jones, JG
    Zabinski, JS
    JOURNAL OF APPLIED PHYSICS, 2000, 88 (02) : 1088 - 1096
12345