Investigation of TiN Coated CBN and CBN Cutting Tool Performance in Hard Milling Application

被引：16
|
作者：
Taylan, Fatih [1 ]
Colak, Oguz [1 ]
Kayacan, Mehmet Cengiz [2 ]
机构：
[1] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, TR-32260 Isparta, Turkey
[2] Suleyman Demirel Univ, Fac Engn, Dept Mech Engn, TR-32260 Isparta, Turkey
来源：
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2011年 / 57卷 / 05期
关键词：
tool wear; hard milling; CBN tools; coated CBN; STEEL; MACHINABILITY;
D O I：
10.5545/sv-jme.2010.059
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cubic Boron Nitride (CBN) and TiN Composite Coated CBN combines the thermal stability, super abrasiveness and cost effectiveness for hard machining applications. This paper reports the results of a study addressing wear performance of these CBN and TiN based coated CBN inserts (SNMN090308) fir face milling of 61 HRC hardened 90MnCrV8 tool steel. Machining test conditions are obtained after dynamic stability simulation of cutting tools and machine tools. The tool wear and cutting forces are also analyzed and the results are presented. (C) 2011 Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：417 / 424
页数：8
相关论文
共 50 条
  • [21] Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool
    Khamel, Samir
    Ouelaa, Nouredine
    Bouacha, Khaider
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (11) : 3605 - 3616
  • [22] Wear and Tool Life of CBN Cutting Tools
    A.G. Mamalis
    J. Kundrák
    M. Horváth
    The International Journal of Advanced Manufacturing Technology, 2002, 20 : 475 - 479
  • [23] Wear and tool life of CBN cutting tools
    Mamalis, AG
    Kundrák, J
    Horváth, M
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2002, 20 (07): : 475 - 479
  • [24] Cutting Tool Edge Temperature in Dry Hard Orthogonal Cutting AISI D2 Tool Steel with CBN Tool
    Tang, Linhu
    Huang, Jianlong
    Xie, Liming
    Luo, Wencui
    MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 169 - +
  • [25] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    Zhao, T.
    Agmell, M.
    Persson, J.
    Bushlya, V.
    Stahl, J. E.
    Zhou, J. M.
    JOURNAL OF SUPERHARD MATERIALS, 2017, 39 (04) : 251 - 258
  • [26] Wear development and cutting forces on CBN cutting tool in Hard Part turning of different hardened steels
    Sadik, M. Ibrahim
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 232 - 237
  • [27] Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    T. Zhao
    M. Agmell
    J. Persson
    V. Bushlya
    J. E. Ståhl
    J. M. Zhou
    Journal of Superhard Materials, 2017, 39 : 251 - 258
  • [28] The Study on Interrupted Cutting Tool Life of Coated Carbide and CBN in Ductile Cast Iron
    Oh, Sung Hoon
    COMPUTER APPLICATIONS FOR MODELING, SIMULATION, AND AUTOMOBILE, 2012, 341 : 287 - 293
  • [29] Performance of nano/micro CBN particle coated tools in superfinish hard machining
    Choi, Youngsik
    Liu, C. Richard
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (09): : 683 - 689
  • [30] Optimization of Cutting Data and Tool Inclination Angles During Hard Milling with CBN Tools, Based on Force Predictions and Surface Roughness Measurements
    Matras, Andrzej
    Zebala, Wojciech
    MATERIALS, 2020, 13 (05)
12345