Investigation of TiN Coated CBN and CBN Cutting Tool Performance in Hard Milling Application

被引：16
|
作者：
Taylan, Fatih [1 ]
Colak, Oguz [1 ]
Kayacan, Mehmet Cengiz [2 ]
机构：
[1] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, TR-32260 Isparta, Turkey
[2] Suleyman Demirel Univ, Fac Engn, Dept Mech Engn, TR-32260 Isparta, Turkey
来源：
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2011年 / 57卷 / 05期
关键词：
tool wear; hard milling; CBN tools; coated CBN; STEEL; MACHINABILITY;
D O I：
10.5545/sv-jme.2010.059
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cubic Boron Nitride (CBN) and TiN Composite Coated CBN combines the thermal stability, super abrasiveness and cost effectiveness for hard machining applications. This paper reports the results of a study addressing wear performance of these CBN and TiN based coated CBN inserts (SNMN090308) fir face milling of 61 HRC hardened 90MnCrV8 tool steel. Machining test conditions are obtained after dynamic stability simulation of cutting tools and machine tools. The tool wear and cutting forces are also analyzed and the results are presented. (C) 2011 Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：417 / 424
页数：8
相关论文
共 50 条
  • [1] Application of CBN cutting tools in hard turning and tool wear
    Zhao, Haidong
    An, Libao
    Yang, Peiqing
    Geng, Ye
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2022 - 2025
  • [2] Effect of cutting conditions on tool performance in CBN hard turning
    Huang, Y
    Liang, SY
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL 32, 2004, 2004, : 511 - 518
  • [3] STUDY ON MILLING BY CBN TOOL
    YOSHIKAWA, T
    ONO, T
    JOURNAL OF MECHANICAL ENGINEERING LABORATORY, 1986, 40 (05): : 214 - 223
  • [4] A STUDY OF CUTTING WITH A CBN TOOL
    LIN, ZC
    CHEN, DY
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 49 (1-2) : 149 - 164
  • [5] Milling hard powder metal with CBN
    Anon
    Modern Machine Shop, 2001, 74 (06)
  • [6] High-pressure sintering of cBN-TiN-Al composite for cutting tool application
    Rong, XZ
    Tsurumi, T
    Fukunaga, O
    Yano, T
    DIAMOND AND RELATED MATERIALS, 2002, 11 (02) : 280 - 286
  • [7] Wear mechanisms of TiN-coated CBN tool during finish hard turning of hot tool die steel
    Dureja, J. S.
    Gupta, V. K.
    Sharma, V. S.
    Dogra, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2010, 224 (B4) : 553 - 566
  • [8] Cutting forces modeling considering the effect of tool thermal property - application to CBN hard turning
    Huang, Y
    Liang, SY
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (03): : 307 - 315
  • [9] Wear mechanisms of TiN-coated CBN tool during finish hard turning of hot tool die steel
    Dureja, J.S.
    Gupta, V.K.
    Sharma, V.S.
    Dogra, M.
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010, 224 (03) : 553 - 566
  • [10] Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
    Thamizhmanii, S.
    Hasan, S.
    WORLD CONGRESS ON ENGINEERING 2008, VOL III, 2008, : 1819 - 1823
12345