Design, Simulation, and Characterization of Variable Inductor With Electrostatic Actuation Fabricated by Using Surface Micromachining Technology

被引：9

作者：

Fang, Dong-Ming ^{[1
]}

Li, Xiu-Han ^{[1
]}

Yuan, Quan ^{[1
]}

Zhang, Hai-Xia ^{[1
]}

机构：

[1] Peking Univ, Inst Microelect, Natl Key Lab Nano Micro Fabricat Technol, Beijing 100871, Peoples R China

来源：

IEEE TRANSACTIONS ON ELECTRON DEVICES | 2010年 / 57卷 / 10期

基金：

中国博士后科学基金;

关键词：

Capacitive actuator; electrostatic actuation; microelectromechanical systems (MEMS); quality factor; variable inductor;

D O I：

10.1109/TED.2010.2056990

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this paper, a new variable inductor with electrostatic actuators was proposed and was fabricated using surface micromachining microelectromechancal systems (MEMS) technology. The variable inductor consists mainly of planar spiral inductor, the shielding metal plate above the spiral inductor, and the electrostatic-driven capacitive actuators. In order to enhance the tuning range of the variable inductor, the shielding metal plate has adopted electroplated Ni80Fe20 Permalloy as the "magnetic core" of the variable inductor. The fabricated variable microinductor was tested and characterized. The measured results indicated that the variable inductor had good performance at high frequency and the tuning range of the variable inductor was 77.8%. The effect of Ni80Fe20 Permalloy metal plate on the inductance of variable inductor was also discussed.

引用

页码：2751 / 2755

页数：5

共 50 条

[41] Sportswear Design Using Simulation Technology
Shimana, Takatsugu
SEN-I GAKKAISHI, 2015, 71 (08) : 390 - 393
[42] Design and fabrication of a three-component force sensor using micromachining technology
Kim, J
Park, Y
Kang, D
JOINT INTERNATIONAL CONFERENCE IMEKO TC3/TC5/TC20, 2002, 1685 : 9 - 15
[43] Design, simulation, and fabrication of an on-chip antenna fabricated using silicon micromachining for broad-band millimeter-wave wireless communications
Sedaghat-Pisheh, Hojr
Shahabadi, Mahmoud
Mohajerzadeh, Shamsodin
2006 EUROPEAN MICROWAVE CONFERENCE, VOLS 1-4, 2006, : 256 - +
[44] Electronically Tunable Allpass Filter Using Voltage Variable Inductor and Linear VCO Design
Mathur, Koushick
Nandi, Rabindranath
IETE JOURNAL OF RESEARCH, 2023, 69 (06) : 3252 - 3257
[45] MEMS switches and other RF components fabricated using CMOS postprocess compatible surface micromachining.
Ericsson, P
Hedström, M
Olsson, A
Scholes, A
Svennebrink, J
Vieider, C
Wenk, B
BOSTON TRANSDUCERS'03: DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2003, : 895 - 898
[46] Monocrystalline Si membranes for pressure sensors fabricated by a novel surface micromachining process using porous silicon
Artmann, H
Schäfer, F
Lammel, G
Armbruster, S
Benzel, H
Schelling, C
Weber, H
Vossenberg, HG
Gampp, R
Muchow, J
Lärmer, F
Finkbeiner, S
MEMS COMPONENTS AND APPLICATIONS FOR INDUSTRY, AUTOMOBILES, AEROSPACE, AND COMMUNICATION II, 2003, 4981 : 65 - 70
[47] Air gap-based MEMS switch technology using nickel surface micromachining
Ekkels, P.
Rottenberg, X.
Czarnecki, P.
Philipsen, H.
Mertens, R.
Puers, R.
Tilmans, H. A. C.
SENSORS AND ACTUATORS A-PHYSICAL, 2011, 166 (02) : 256 - 263
[48] WR-3 Band Waveguides and Filters Fabricated Using SU8 Photoresist Micromachining Technology
Shang, Xiaobang
Ke, Maolong
Wang, Yi
Lancaster, Michael J.
IEEE TRANSACTIONS ON TERAHERTZ SCIENCE AND TECHNOLOGY, 2012, 2 (06) : 629 - 637
[49] Design, simulation, fabrication, and characterization of a digital variable optical attenuator
Sun, Winston
Noell, Wilfried
Zickar, Michael
Mughal, M. Junaid
Perez, Frank
Riza, Nabeel A.
de Rooij, Nicolaas F.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2006, 15 (05) : 1190 - 1200
[50] Design and experiment of a variable stiffness prosthetic knee joint using parallel elastic actuation
Zhu, Jinliang
Sun, Yuanxi
Xiong, Jie
Liu, Yiyang
Zheng, Jia
Bai, Long
ROBOTICS AND AUTONOMOUS SYSTEMS, 2024, 171

← 1 2 3 4 5 →