Shear Stress and Deformation Analysis of Static Bonded Multi-layer of Pyrex7740 Glass and Aluminum

被引：0

作者：

Liu, Cuirong ^{[1
]}

Jia, Tuosheng ^{[1
]}

Meng, Qingsen ^{[1
]}

机构：

[1] Taiyuan Univ Sci & Technol, Dept Mat Sci & Engn, Taiyuan 030024, Peoples R China

来源：

ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES | 2011年 / 145卷

关键词：

Static bonding; Aluminum; Pyrex glass; Finite element; Shear stress;

D O I：

10.4028/www.scientific.net/AMR.145.361

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the technological experiments of static bonding has been carried out in the bonding of multi-layer Pyrex7740 Glass and Al. The joining mechanism is analyzed with SEM and EDX. It's observed that bonding region across the interface consists of the metal layer, oxide transitional layer and the glass layer. The bonding process can mainly be categorized into anodic process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining successfully. The analysis of the shear stress and deformation in the static bonded samples was made by MARC. Modeling studies showed the maximum shear stress of bonded samples all occur in the transition layer. It also shows the shear stress and deformation in the three-layer samples is significantly smaller than that in the two-layer samples. This has an important advantage in MEMS fabrication.

引用

页码：361 / 364

页数：4

共 50 条

[21] Integrating a multi-layer deformation model in FRAPTRAN for accident Tolerant fuel analysis
He, Yanan
Shirvan, Koroush
Wu, Yingwei
Su, Guanghui
ANNALS OF NUCLEAR ENERGY, 2019, 133 : 441 - 454
[22] Highly accurate stress analysis in thin film multi-layer interconnections
Iijima, S
Takenouchi, M
Yokouchi, K
Yoneda, Y
1998 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, 1998, 3582 : 479 - 484
[23] Static response and free vibration analysis of the composite sandwich structures with multi-layer cores
Li, D. H.
Wang, R. P.
Qian, R. L.
Liu, Y.
Qing, G. H.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 111 : 101 - 115
[24] Modeling the Process of Quasi-static Deformation of Cylindrical Composites During Their Manufacture by Multi-Layer Thread Winding
Parshin, Dmitry A.
MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2020): PROCEEDING OF THE 14TH INTERNATIONAL CONFERENCE ON MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES, 2020, 2315
[25] Quantitative analysis of voids in multi-layer bonded structures based on transmitted laser ultrasonic waves
Zhang, Kuanshuang
Li, Shicheng
Zhou, Zhenggan
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2019, 19 (01) : 79 - 90
[26] Composite laminates: nonlinear interlaminar stress analysis by multi-layer shell elements
Basar, Y
Itskov, M
Eckstein, A
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2000, 185 (2-4) : 367 - 397
[27] Multi-layer advanced fiber hybridisation (glass-carbon-Kevlar) and variable stiffness effect on composite structure responses (stress and deformation): An FE approach
Sahu, P.
Sharma, N.
Panda, S. K.
SCIENTIA IRANICA, 2021, 28 (05) : 2701 - 2718
[28] Complementary and normalized energies during static and dynamic uniaxial deformation of single and multi-layer foam-filled tube
Mirbagheri, Seyed Mohammad Hossein
Salehi, Mina
JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2022, 24 (02) : 1470 - 1490
[29] Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches
Kilicaslan, Cenk
Gueden, Mustafa
Odaci, Ismet Kutlay
Tasdemirci, Alper
THIN-WALLED STRUCTURES, 2014, 78 : 70 - 78
[30] Elastic-plastic deformation analysis of multi-layer surface coating under sliding contact
Xinxiang, Pan
Li, Yan
Jiujun, Xu
Thin Solid Films, 1999, 354 (01): : 154 - 161

← 1 2 3 4 5 →