Fatigue life estimations of alclad AA2024-T3 friction stir clinch joints

被引：27
|
作者：
Lin, P. -C. [1 ,2 ]
Lo, S. -M. [2 ]
Wu, S. -P. [2 ]
机构：
[1] Natl Chung Cheng Univ, Adv Inst Mfg High Tech Innovat, Chiayi 62102, Taiwan
[2] Natl Chung Cheng Univ, Dept Mech Engn, Chiayi 62102, Taiwan
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2018年 / 107卷
关键词：
Friction stir clinching; Friction stir spot welding; Fatigue; Aided; Aluminum alloy 2024-T3; LAP-SHEAR SPECIMENS; INTENSITY FACTOR SOLUTIONS; CROSS-TENSION SPECIMENS; FORM STRUCTURAL STRESS; SPOT WELDS; ALUMINUM-ALLOY; FAILURE MODES; GEOMETRIC FUNCTIONS; LOADING CONDITIONS; SHEETS;
D O I：
10.1016/j.ijfatigue.2017.10.011
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Joining aided AA2024-T3 sheets is difficult for conventional welding processes due to ductile surface cladding layers. Friction stir clinching (FSC) was therefore proposed to overcome this problem. Here, two types of specimens, tensile-shear and cross-tension, were made to investigate general fatigue behavior of FSC joints. Critical fatigue cracks and failure modes were identified by photos and micrographs. Interfacial and kinked crack fatigue models consist of local and global stress intensity factors (SIFs) and a Paris law approach were taken for fatigue life estimations. The fatigue life estimations well agreed with the experimental fatigue data. The fatigue data of FSC joints in above specimens were well correlated by effective SIF ranges.
引用
收藏
页码：13 / 26
页数：14
相关论文
共 50 条
  • [31] An Investigation into the Mechanism for Enhanced Mechanical Properties in Friction Stir Welded AA2024-T3 Joints Coated with Cold Spraying
    Li, Na
    Li, Wenya
    Yang, Xiawei
    Xu, Yaxin
    Feng, Yan
    Vairis, Achilles
    INTERNATIONAL THERMAL SPRAY CONFERENCE AND EXPOSITION (ITSC 2018), 2018, : 126 - 133
  • [32] Fatigue and fracture behaviour of Friction Stir Welded AA-2024-T351 joints
    Vuherer, T.
    Milcic, M.
    Glodez, S.
    Milcic, D.
    Radovic, L.
    Kramberger, J.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 114
  • [33] An investigation into the mechanism for enhanced mechanical properties in friction stir welded AA2024-T3 joints coated with cold spraying
    Li, N.
    Li, W. Y.
    Yang, X. W.
    Feng, Y.
    Vairis, A.
    APPLIED SURFACE SCIENCE, 2018, 439 : 623 - 631
  • [34] A Numerical and Experimental Analysis of Microstructural Aspects in AA2024-T3 Friction Stir Welding
    Carlone, Pierpaolo
    Palazzo, Gaetano S.
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 1022 - 1030
  • [35] Microstructure and mechanical properties of friction stir welded AA2024-T3 aluminum alloy
    Khodir, SA
    Shibayanagi, T
    Naka, M
    MATERIALS TRANSACTIONS, 2006, 47 (01) : 185 - 193
  • [36] Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy
    Regev, Michael
    Rashkovsky, Tal
    Cabibbo, Marcello
    Spigarelli, Stefano
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (10) : 5054 - 5063
  • [37] Pinless Friction Stir Welding of AA2024-T3 Joint and Its Failure Modes
    李文亚
    李锦锋
    张志函
    高大路
    王卫兵
    栾国红
    Transactions of Tianjin University, 2014, 20 (06) : 439 - 443
  • [38] Microstructure and Mechanical Properties of Additive Friction Stir Deposition for AA2024-T3 Alloy
    Wang, Ruilin
    Yang, Xinqi
    Tang, Wenshen
    Luo, Ting
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (18): : 146 - 153
  • [39] Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy
    Michael Regev
    Tal Rashkovsky
    Marcello Cabibbo
    Stefano Spigarelli
    Journal of Materials Engineering and Performance, 2018, 27 : 5054 - 5063
  • [40] Pinless friction stir welding of AA2024-T3 joint and its failure modes
    Li W.
    Li J.
    Zhang Z.
    Gao D.
    Wang W.
    Luan G.
    Transactions of Tianjin University, 2014, 20 (06) : 439 - 443
12345