High bandwidth thermal microscopy of machining AISI 1045 steel

被引：33
|
作者：
Davies, MA [1 ]
Cooke, AL [1 ]
Larsen, ER [1 ]
机构：
[1] Univ N Carolina, Ctr Precis Metrol, Dept Mech Engn & Engng Sci, Charlotte, NC 28223 USA
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2005年 / 54卷 / 01期
关键词：
high-speed cutting; finite element method; thermal microscope;
D O I：
10.1016/S0007-8506(07)60050-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A custom thermal microscope was constructed using a high-bandwidth thermal imaging system (40 megapixels/sec). The microscope was attached to a high-speed machining centre (20 thousand RPM/18.5 kW spindle) that was operated as a high-speed lathe to measure temperature distributions during orthogonal cutting of AISI 1045 steel at surface speeds of up to 605 m/min. Measurements were made for a wide range of cutting parameters and compared with finite element analysis. While the ultimate goal is to produce improved tool design, the results emphasize the need for predictive rather than interpretive simulation of the temperature fields in machining.
引用
收藏
页码：63 / 66
页数：4
相关论文
共 50 条
  • [21] Finite element modeling and validation of chip segmentation in machining of AISI 1045 steel
    Devotta, Ashwin
    Beno, Tomas
    Siriki, Raveendra
    Lof, Ronnie
    Eynian, Mandi
    16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 499 - 504
  • [22] Effect of microstructure softening events on the chip morphology of AISI 1045 steel during high speed machining
    C. L. Pu
    G. Zhu
    S. Yang
    E. B. Yue
    S. V. Subramanian
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 2149 - 2155
  • [23] Assessment of Restricted Contact Cutting Tool in Dry Machining of AISI 1045 Steel
    Ma, J.
    Ge, Xianchen
    Duong, Nick H.
    Lei, Shuting
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2A, 2014,
  • [24] Numerical investigation of the performance of elliptical vibration cutting in machining of AISI 1045 steel
    Wang, Dazhong (wdzh168@126.com), 1600, Springer London (98): : 1 - 4
  • [25] Numerical investigation of the performance of elliptical vibration cutting in machining of AISI 1045 steel
    Kong, Chao
    Wang, Dazhong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (1-4): : 715 - 727
  • [26] Some Metallurgical Observations of Adiabatic Shear Phenomenon During High Speed Machining AISI 1045 Hardened Steel
    Duan, Chunzheng
    Yu, Haiyang
    Li, Honghua
    Wang, Minjie
    ADVANCED SCIENCE LETTERS, 2011, 4 (6-7) : 2493 - 2497
  • [27] Assessment of Microgrooved Cutting Tool in Dry Machining of AISI 1045 Steel: A Numerical Study
    Ma, J.
    Duong, Hung
    Lian, Yunsong
    Lei, Shuting
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2B, 2013,
  • [28] Study of hardening and wear resistance of the AISI 1045 steel quenched with automotive and machining coolant
    Ravagli-Reyes, Joan
    Perez-Ruiz, Eduardo
    Llano-Martinez, Jorge
    UIS INGENIERIAS, 2019, 18 (02): : 113 - 119
  • [29] Thermal analysis and study of chip formation in turning of AISI 1045 steel
    Bourouis, Fairouz
    Hamadi, Billel
    Chikh, Yassine
    UPB Scientific Bulletin, Series D: Mechanical Engineering, 2023, 85 (02): : 261 - 274
  • [30] Evaluation of the mechanical behavior of an AISI 1045 steel subjected to thermal treatments
    Bolanos, Francisco
    Caicedo, Jose
    Alfonzo, Carlos
    Santeliz, Anahi
    Porrello, Argel
    INGENIERIA UC, 2018, 25 (01): : 99 - 107
12345