Fabrication of nanostructured tool steel layer by combination of laser cladding and friction stir processing

被引：19
|
作者：
Morisada, Yoshiaki [1 ]
Fujii, Hidetoshi [2 ]
Mizuno, Tadashi
Abe, Genryu
Nagaoka, Toru [1 ]
Fukusumi, Masao [1 ]
机构：
[1] Osaka Municipal Tech Res Inst, Osaka 5368553, Japan
[2] Osaka Univ, Joining & Welding Res Inst, Suita, Osaka 565, Japan
来源：
SURFACE & COATINGS TECHNOLOGY | 2011年 / 205卷 / 11期
关键词：
Friction stir processing; Laser cladding; Microstructural refinement; Carbide particle; Tool steel; MICROSTRUCTURES; WEAR;
D O I：
10.1016/j.surfcoat.2010.11.062
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A general fabrication process of the nanostructured tool steel layer with various carbide particles was developed by a combination of laser cladding and friction stir processing (FSP). The dendritic carbides formed by the laser cladding were crushed to carbide nanoparticles during the FSP, and were uniformly dispersed in the iron matrix. The shape and size of the carbide particles could be controlled by the conditions of the laser cladding and the FSP. The nanostructured tool steel layer formed by the laser and the FSP under the optimized conditions had a microhardness of similar to 900 HV which was higher than that of conventional tool steels. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：3397 / 3403
页数：7
相关论文
共 50 条
  • [31] Composite fabrication using friction stir processing—a review
    H. S. Arora
    H. Singh
    B. K. Dhindaw
    The International Journal of Advanced Manufacturing Technology, 2012, 61 : 1043 - 1055
  • [32] Fabrication of Magnesium-NiTip Composites via Friction Stir Processing: Effect of Tool Profile
    Gangil, N.
    Nagar, H.
    Mohammed, S. M. A. K.
    Singh, D.
    Siddiquee, A. N.
    Maheshwari, S.
    Chen, D. L.
    METALS, 2020, 10 (11) : 1 - 11
  • [33] Fabrication of copper–diamond composite by friction stir processing
    Nazmul Huda
    Anuj Bisht
    Eric Moreau
    Stephen Corbin
    Eugen Rabkin
    Adrian P. Gerlich
    Journal of Materials Science, 2023, 58 : 4184 - 4198
  • [34] FABRICATION OF SURFACE COMPOSITE BY FRICTION STIR PROCESSING USING A NOVEL DIRECT PARTICLE INJECTION TOOL
    Muthukumar, P.
    Jerome, S.
    Kumar, R. John Felix
    Prakash, S.
    SURFACE REVIEW AND LETTERS, 2019, 26 (04)
  • [35] Friction stir cladding of commercially pure titanium on 304 stainless steel
    Iman Harasani
    Roohollah Jamaati
    Hamed Jamshidi Aval
    Welding in the World, 2022, 66 : 1781 - 1798
  • [36] Friction stir cladding of commercially pure titanium on 304 stainless steel
    Harasani, Iman
    Jamaati, Roohollah
    Aval, Hamed Jamshidi
    WELDING IN THE WORLD, 2022, 66 (09) : 1781 - 1798
  • [37] Cladding of copper sheet on mild steel using friction stir welding
    Mahto, Mithlesh Kumar
    Kumar, Adarsh
    Raja, Avinash Ravi
    Vashista, Meghanshu
    Yusufzai, Mohd Zaheer Khan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (9-10): : 3345 - 3360
  • [38] Cladding of copper sheet on mild steel using friction stir welding
    Mithlesh Kumar Mahto
    Adarsh Kumar
    Avinash Ravi Raja
    Meghanshu Vashista
    Mohd Zaheer Khan Yusufzai
    The International Journal of Advanced Manufacturing Technology, 2022, 118 : 3345 - 3360
  • [39] Simulation of Friction Stir Processing with internally cooled tool
    Albakri, A. N.
    Mansoor, B.
    Nassar, H.
    Khraisheh, M. K.
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 560 - 565
  • [40] Corrosion Behavior of CMT Cladding Layer of AZ91 Magnesium Alloy Subjected to Friction Stir Processing
    Chen, Yang
    Shen, Junqi
    Hu, Shengsun
    Zhen, Yahui
    Zhao, Huichao
    MATERIALS, 2024, 17 (12)
12345