Finite Element Simulation of Welding of Large Components Based on Inherent Strain and Thermo Elastic Plasticity

被引：0

作者：

Fang Yuanbin ^{[1
,2
]}

Zong Xuemei ^{[1
,2
]}

Wang Can ^{[1
,2
]}

机构：

[1] Jiangsu Xuzhou Engn Machinery Res Inst, Xuzhou 221004, Jiangsu, Peoples R China

[2] XCMG Construct Machinery Co Ltd, State Key Lab Intelligent Mfg Adv Construct Macha, Xuzhou 221004, Jiangsu, Peoples R China

来源：

PROCEEDINGS OF THE 2017 7TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING (ICADME 2017) | 2017年 / 136卷

关键词：

Inherent strain; thermo elastic plastic; welding deformation; stress;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Based on inherent strain theory, it predicts and optimizes welding deformation of movable arm by means of welding numerical simulation. At the same time, based on thermal elastic-plastic theory, it predicts stress distribution, and finite element model is verified correctly by experiments. The results show that maximum deformation occurs at the front ear plate, and maximum unilateral deformation is 1.95mm. Compared with experimental results, error is about 11%, which proves the accuracy of simulation results. The best welding sequence is 1, 5, 4, 2, 3. Maximum deformation of front ear plate is reduced by 0.47mm, and welding deformation is reduced by 24.1%. Maximum stress is located at the intersection of reinforcing plate and lower cover, and peak value is 289.4MPa. Simulation results are in good agreement with experimental results, and error is controlled within 11.96%, which verifies the validity of finite element model.

引用

页码：20 / 24

页数：5

共 50 条

[11] Deformation simulation of large welding structure based on local-global finite element method
Zhao, W. (wzzhao@djtu.edu.cn), 1600, Chinese Mechanical Engineering Society (50):
[12] FINITE-ELEMENT APPROXIMATIONS IN THERMO-PLASTICITY
MATTHIES, H
NUMERICAL FUNCTIONAL ANALYSIS AND OPTIMIZATION, 1979, 1 (02) : 145 - 160
[13] A TWO-DIMENSIONAL FINITE ELEMENT MODEL OF THE GRAIN BOUNDARY BASED ON THERMO-MECHANICAL STRAIN GRADIENT PLASTICITY
Song, Yooseob
Voyiadjis, George Z.
JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2018, 56 (02) : 377 - 391
[14] Finite Element Simulation of Welding Process Based on Reverse Engineering
Zhao W.
Liu X.
Wu H.
Wei Y.
Zhang T.
Li Z.
Wei, Yanhong (yhwei@nuaa.edu.cn), 2018, Chinese Mechanical Engineering Society (54): : 102 - 109
[15] Variation Simulation of Welded Assemblies Using a Thermo-Elastic Finite Element Model
Lorin, Samuel
Cromvik, Christoffer
Edelvik, Fredrik
Lindkvist, Lars
Soderberg, Rikard
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 2014, 14 (03)
[16] Chip breaking process simulation by thermo-elastic plastic finite element method
Seimitsu Kogaku Kaishi, 8 (1161-1166):
[17] VARIATION SIMULATION OF WELDED ASSEMBLIES USING A THERMO-ELASTIC FINITE ELEMENT MODEL
Lorin, Samuel
Cromvik, Christoffer
Edelvik, Fredrik
Lindkvist, Lars
Soderberg, Rikard
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, 2014,
[18] Prediction of welding distortion by elastic finite element analysis using inherent deformation estimated through inverse analysis
Liang W.
Deng D.
Sone S.
Murakawa H.
Welding in the World, 2005, 49 (11-12) : 30 - 39
[19] Consistent strain method in finite element plasticity
Bernspang, L.
Samuelsson, A.
Kuessner, M.
Wriggers, P.
Computers and Structures, 1995, 54 (01): : 27 - 33
[20] Large strain deformations of elastic shells - Constitutive modelling and finite element analysis
Sansour, C
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1998, 161 (1-2) : 1 - 18

← 1 2 3 4 5 →