Effect of surface flaw on fatigue strength of shot-peened medium-carbon steel

被引：27
|
作者：
Sakamoto, Junji [1 ,2 ]
Lee, Yong-Sung [1 ]
Cheong, Seong-Kyun [1 ]
机构：
[1] Seoul Natl Univ Sci & Technol, Dept Mech & Automot Engn, Seoul 139743, South Korea
[2] Kyushu Univ, Fac Engn, Dept Mech Engn, Fukuoka 8190395, Japan
来源：
ENGINEERING FRACTURE MECHANICS | 2015年 / 133卷
关键词：
Fatigue strength; Shot peening; Surface flaw; Small fatigue crack behavior; Focused ion beam; LIMIT; BEHAVIOR; ALLOY;
D O I：
10.1016/j.engfracmech.2014.11.005
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The effect of surface flaw on fatigue strength of shot-peened medium-carbon steel was experimentally studied. The fatigue crack initiation life, fatigue crack growth life, and fatigue limit in the steel can be increased by using shot peening (SP). The fatigue fracture of SP specimen occurred by the propagations and coalescence of fatigue cracks initiated from the initial cracks due to SP. The fatigue limit of SP specimen was determined by the propagation limit of fatigue crack. When the size of surface flaw is sufficiently small compared to the SP affected zone, the flaws have not significantly changed the fatigue strength of the SP specimens. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：99 / 111
页数：13
相关论文
共 50 条
  • [31] Very high cycle fatigue behavior of shot-peened 3Cr13 high strength spring steel
    Nie, Baohua
    Zhang, Zheng
    Zhao, Zihua
    Zhong, Qunpeng
    MATERIALS & DESIGN, 2013, 50 : 503 - 508
  • [32] On the determination of the bending fatigue strength in and above the very high cycle fatigue regime of shot-peened gears
    Fuchs, D.
    Schurer, S.
    Tobie, T.
    Stahl, K.
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2022, 86 (01): : 81 - 92
  • [33] Modeling fatigue crack nucleation at primary inclusions in carburized and shot-peened martensitic steel
    Zhang, Jixi
    Prasannavenkatesan, Rajesh
    Shenoy, Mahesh M.
    McDowell, David L.
    ENGINEERING FRACTURE MECHANICS, 2009, 76 (03) : 315 - 334
  • [34] Fatigue crack growth prediction for shot-peened steel considering residual stress relaxation
    Gao, Zi'ang
    Gan, Jin
    Liu, Huabing
    Liu, Xiang
    Wu, Weiguo
    MATERIALS & DESIGN, 2023, 234
  • [35] Influence of annealing on the shot-peened surface of duplex stainless steel at elevated temperatures
    Feng, Qiang
    Wu, Xueyan
    Jiang, Chuanhai
    Xu, Zhou
    Zhan, Ke
    NUCLEAR ENGINEERING AND DESIGN, 2013, 255 : 146 - 152
  • [36] Surface grain boundary engineering of shot-peened type 304 stainless steel
    Osama M. Alyousif
    Dirk L. Engelberg
    Thomas J. Marrow
    Journal of Materials Science, 2008, 43 : 1270 - 1277
  • [37] Surface grain boundary engineering of shot-peened type 304 stainless steel
    Alyousif, Osama M.
    Engelberg, Dirk L.
    Marrow, Thomas J.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (04) : 1270 - 1277
  • [38] Effect of microstructure on the fatigue properties of microalloyed medium-carbon steel
    Zha, Xiao-Qin
    Hui, Wei-Jun
    Yong, Qi-Long
    Dong, Han
    Weng, Yu-Qing
    Long, Jin-Ming
    Jinshu Rechuli/Heat Treatment of Metals, 2007, 32 (06): : 92 - 95
  • [39] High cycle fatigue behavior prediction of shot-peened parts
    Fathallah, R
    Laamouri, A
    Sidhom, H
    Braham, C
    INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (10) : 1053 - 1067
  • [40] Fatigue Life Estimation of Medium-Carbon Steel with Different Surface Roughness
    Li, Changyou
    Dai, Weibing
    Duan, Fei
    Zhang, Yimin
    He, David
    APPLIED SCIENCES-BASEL, 2017, 7 (04):
12345