TOOL WEAR OF SUPERHARD CERAMIC COATED TOOLS IN DRILLING OF CFRP

被引：0
|
作者：
Swan, Samuel [1 ]
Jones, Jacob [2 ]
Kim, Dae-wook [2 ]
Dihn Nguyen [3 ]
Kwon, Patrick [3 ]
机构：
[1] Deakin Univ, Geelong, Vic, Australia
[2] Washington State Univ, Vancouver, WA USA
[3] Michigan State Univ, E Lansing, MI 48824 USA
来源：
PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4 | 2018年
关键词：
CUTTING TOOLS; TITANIUM; COMPOSITE; COATINGS; CARBIDE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to investigate the effectiveness of super-hard ceramic coatings by evaluating tool wear when drilling carbon fiber reinforced plastics (CFRP) composite. The drilling experiments of CFRP are conducted with diamond-like coating (DLC) coated, AlMgB14(BAM) coated, AlCrSiN coated, and uncoated tungsten carbide drills. Tool wear evolution is measured qualitatively as well as quantitatively using the scanning electron and confocal laser scanning microscopes. Both DLC and BAM coatings failed when drilling CFRP only within 10 holes while AlCrSiN coating did not fail. Failure mechanisms of each coating when drilling CFRP are discussed.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] TOOL WEAR OF SUPERHARD CERAMIC COATED TOOLS IN DRILLING OF CFRP/TI STACKS
    Dinh Nguyen
    Voznyuk, Vadim
    Bin Abdullah, Mohammad Sayem
    Kim, Dave
    Kwon, Patrick Y.
    PROCEEDINGS OF THE ASME 14TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2019, VOL 2, 2019,
  • [2] Tool Wear of Advanced Coated Tools in Drilling of CFRP
    Swan, Sam
    Bin Abdullah, Mohammad Sayem
    Kim, Dave
    Dinh Nguyen
    Kwon, Patrick
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018, 140 (11):
  • [3] Tool wear of coated drills in drilling CFRP
    Wang, Xin
    Kwona, Parick Y.
    Sturtevant, Caleb
    Kim, Dave
    Lantrip, Jeff
    JOURNAL OF MANUFACTURING PROCESSES, 2013, 15 (01) : 127 - 135
  • [4] Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites
    Celik, Ali
    Lazoglu, Ismail
    Kara, Alpagut
    Kara, Ferhat
    WEAR, 2015, 338 : 11 - 21
  • [5] Ceramic drilling tools - Suitable for CFRP?
    Heisel U.
    Talpeanu D.
    Ivanova S.
    Pfeifroth T.
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2010, 105 (10): : 851 - 854
  • [6] Modeling and tool wear in drilling of CFRP
    Iliescu, D.
    Gehin, D.
    Gutierrez, M. E.
    Girot, F.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (02): : 204 - 213
  • [7] A STUDY ON THE CUTTING PERFORMANCE OF DIAMOND COATED TOOLS - TOOL WEAR OF DIAMOND COATED TOOLS IN MACHINING OF CFRP
    USUKI, H
    NARUTAKI, N
    YAMANE, Y
    KARASUNO, S
    ITO, T
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1991, 25 (01): : 35 - 36
  • [8] Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
    Kuo, Chunliang
    Wang, Chihying
    Ko, Shunkai
    WEAR, 2018, 398 : 1 - 12
  • [9] Study on Tool Wear When CFRP are Milled with CVD Diamond Coated Tools
    Liu, J. D.
    Ye, X. Z.
    Yang, X. F.
    Yu, D. M.
    Jin, J. W.
    INTERNATIONAL CONFERENCE ON AUTOMATION, MECHANICAL AND ELECTRICAL ENGINEERING (AMEE 2015), 2015, : 143 - 149
  • [10] Experimental investigations into tool wear of drilling CFRP
    Hrechuk, Andrew
    Bushlya, Volodymyr
    M'Saoubi, Rachid
    Stahl, Jan-Eric
    PROCEEDINGS OF THE 8TH SWEDISH PRODUCTION SYMPOSIUM (SPS 2018), 2018, 25 : 294 - 301
12345