Study on Tool Wear When CFRP are Milled with CVD Diamond Coated Tools

被引：0
|
作者：
Liu, J. D. [1 ]
Ye, X. Z. [2 ]
Yang, X. F. [1 ]
Yu, D. M. [1 ]
Jin, J. W. [1 ]
机构：
[1] Jimei Univ, Sch Mech & Energy Engn, Xiamen, Peoples R China
[2] Jimei Univ, Engn Training Ctr, Xiamen, Peoples R China
来源：
INTERNATIONAL CONFERENCE ON AUTOMATION, MECHANICAL AND ELECTRICAL ENGINEERING (AMEE 2015) | 2015年
关键词：
CVD diamond coating tool; CFRP; wear; BEHAVIOR;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Basing on the milling experiment of carbon fiber reinforced plastics (CFRP), the wear behavior of cemented carbide tool and chemical vapor deposition (CVD) diamond coating tool on the different cutting condition were compared and studied. The result shows that the flank wear value VB increases with increase of cutting speed, or increase of depth of cut, or decreases of table speed when other cutting parameter is constant. But the flank wear value of cemented carbide tool is 2.3-3.8 times higher than CVD diamond coating tool for the same cutting condition.
引用
收藏
页码：143 / 149
页数：7
相关论文
共 50 条
  • [1] A STUDY ON THE CUTTING PERFORMANCE OF DIAMOND COATED TOOLS - TOOL WEAR OF DIAMOND COATED TOOLS IN MACHINING OF CFRP
    USUKI, H
    NARUTAKI, N
    YAMANE, Y
    KARASUNO, S
    ITO, T
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1991, 25 (01): : 35 - 36
  • [2] Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
    Kuo, Chunliang
    Wang, Chihying
    Ko, Shunkai
    WEAR, 2018, 398 : 1 - 12
  • [3] Tool Wear of Advanced Coated Tools in Drilling of CFRP
    Swan, Sam
    Bin Abdullah, Mohammad Sayem
    Kim, Dave
    Dinh Nguyen
    Kwon, Patrick
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018, 140 (11):
  • [4] The analysis of tool wear in milling CFRP with different diamond coated tool
    Yang X.
    Li Y.
    Yan G.
    Liu J.
    Yu D.
    1600, Trans Tech Publications Ltd (667): : 231 - 236
  • [5] TOOL WEAR OF SUPERHARD CERAMIC COATED TOOLS IN DRILLING OF CFRP
    Swan, Samuel
    Jones, Jacob
    Kim, Dae-wook
    Dihn Nguyen
    Kwon, Patrick
    PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018,
  • [6] High performance drilling tools for CFRP - Wear and performance of CVD-diamond coatings
    Uhlmann, Eckart
    Christiansen, Gerret
    Reimers, Walter
    Brömmelhoff, Katrin
    WT Werkstattstechnik, 2019, 109 (1-2): : 35 - 39
  • [7] Wear behaviour of CVD diamond tools
    Uhlmann, E
    Brücher, M
    INDUSTRIAL DIAMOND REVIEW, 2002, 62 (01): : 17 - +
  • [8] CVD diamond coated cutting tools
    Sjöstrand, ME
    Reineck, I
    Hilding, T
    Tenerz, H
    ADVANCES IN HARD MATERIALS PRODUCTION, 1996, : 377 - 385
  • [9] Experimental study on tool wear in milling CFRP/Ti laminated materials with diamond coated unit edge tool
    Wang Changhong
    Wang Junfa
    Han Li
    Wei Qingyuan
    Deng Jiayu
    Gao Yubo
    FERROELECTRICS, 2022, 594 (01) : 166 - 174
  • [10] Tool wear of coated tools when machining a titanium alloy
    Bilbatua, JP
    Llorente, JI
    de Lacalle, LNL
    Sanchez, JA
    COST 516 TRIBOLOGY SYMPOSIUM, 1998, 180 : 337 - 347
12345