Effect of Aging on the Microstructure and Mechanical Properties of 1460 Alloy

被引:6
|
作者
Ma, Juan [1 ]
Yan, De-Sheng [1 ]
Rong, Li-Jian [1 ]
Li, Yi-Yi [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
关键词
Al-Li alloy; Precipitate; Precipitation hardening process; Mechanical property; TRANSMISSION-ELECTRON-MICROSCOPY; AL-LI ALLOYS; CU ALLOYS; ZR ALLOY; EVOLUTION; STRENGTH; BEHAVIOR;
D O I
10.1007/s40195-015-0219-7
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Effects of the aging temperature on the hardening response, the tensile properties and the precipitate microstructure evolution of 1460 alloy were studied in this work. It was found that Al-3 (Sc, Zr) and delta' (Al3Li) phases were precipitated from the matrix at the very early aging stage, while the precipitation of T1 (Al2CuLi) and theta' (Al2Cu) was much slower than that of the delta' phase. When aging at higher temperature (160 and 190 degrees C), the delta', Tl and theta' phases tended to form simultaneously and grow up very quickly. Conversely, the delta' and theta '' (Al2Cu) phases were precipitated separately and more dispersive at lower aging temperature (130 degrees C). Taken together, the alloy aged at 160 degrees C exhibited improved mechanical properties owing to the uniform dispersion of the fine Tl precipitates.
引用
收藏
页码:454 / 459
页数:6
相关论文
共 50 条
  • [41] Effect of solution treatment and artificial aging on microstructure and mechanical properties of Al-Cu alloy
    Jang, Jae-Ho
    Nam, Dae-Geun
    Park, Yong-Ho
    Park, Ik-Min
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (03) : 631 - 635
  • [42] Effect of Cold Rolling and Aging on the Microstructure and Mechanical Properties of Ti-Nb-Zr Alloy
    Feng He
    Shuangping Yang
    Jimin Cao
    Journal of Materials Engineering and Performance, 2020, 29 : 3411 - 3419
  • [43] The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy
    Zhiyun Ye
    Cuiqin Li
    Zhenghua Huang
    Hao Luo
    Feng Chen
    Zhiqiao Yan
    Jianing Li
    Chunjie Xu
    Zhongming Zhang
    Journal of Materials Science, 2022, 57 : 6445 - 6459
  • [44] Effect of aging treatment on microstructure and mechanical properties of centrifugally cast Al-Cu alloy
    Liu, Ai-Hui
    Sui, Yan-Wei
    Zhou, Guang-Hong
    Ding, Hong-Yan
    Zhang, Yue
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, 32 (12): : 94 - 97
  • [45] The stress-induced α" and its effect on the aging microstructure and mechanical properties in an α plus β titanium alloy
    Jia, Yandi
    Ma, Yingjie
    Su, Huhu
    Huang, Sensen
    Wang, Qian
    Qi, Min
    Yang, Yujing
    Zheng, Shijian
    Lei, Jiafeng
    Yang, Rui
    MATERIALS CHARACTERIZATION, 2024, 209
  • [46] Effect of Aging Treatment on Microstructure Evolution and Mechanical Properties of Ti55531 Titanium Alloy
    Zhang Qifei
    Yang Shuai
    Liu Shujun
    Zhang Yusen
    Chen Lei
    Jin Miao
    Guo Baofeng
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (07) : 2645 - 2653
  • [47] The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy
    Ye, Zhiyun
    Li, Cuiqin
    Huang, Zhenghua
    Luo, Hao
    Chen, Feng
    Yan, Zhiqiao
    Li, Jianing
    Xu, Chunjie
    Zhang, Zhongming
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (11) : 6445 - 6459
  • [48] Effects of electropulsing aging on the mechanical properties and microstructure of 7150 aluminum alloy
    Chen, Kai
    Zhan, Lihua
    Zhang, Yun
    Liu, Peng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [49] Effect of Be on the microstructure and mechanical properties of cast Mg alloy
    Zhao, Yunhu
    Wang, Qudong
    Ding, Wenjiang
    Zeng, Xiaoqin
    Lu, Yizhen
    Zhu, Yanping
    Tezhong Zhuzao Ji Youse Hejin/Special Casting & Nonferrous Alloys, 2000, (03): : 10 - 12
  • [50] Effect of Y on Microstructure and Mechanical Properties of A Ti Alloy
    Liu, Zhiguang
    Zhang, Changjiang
    Chai, Lihua
    Chen, Yuyong
    Woo, Kee-Do
    PRICM 7, PTS 1-3, 2010, 654-656 : 460 - +